Brewing Coffee Later (Delay Brew) - Sunbeam BVSBSJX36 Series User Manual

NOTE: The BREW NOW green light must be on for the FRESH
BREW™ TIMER feature to operate. The time and delay brew
time cannot be set when the fresh brew time is displayed.
BREWING COFFEE LATER
1. You must first set the time for when you would
like the coffeemaker to begin brewing your coffee
as described in "Setting the Clock and the Delay
Brew Timer" section.
2. Prepare your coffeemaker as described in
"Adding Water and Ground Coffee" section.
3. To activate DELAY BREW and program
your coffeemaker to brew coffee at
a later time, press the SELECT button
twice (Figure 9). The Amber DELAY
BREW light will turn on. The coffeemaker
is now set to automatically brew coffee
at the pre-set later time. At this time the
brew strength light will turn on. You can
select the strength that you desire by
pressing the BREW STRENGTH button.
(Amber for STRONG, green for REGULAR)
4. At the pre-set time, the green BREW NOW light
will turn on and the DELAY BREW Amber light will
turn off, indicating the brewing has started in the
selected brew strength. The FRESH BREW™ TIMER
feature will start.
5. The coffeemaker warmer plate will keep your coffee
hot for 2 hours and then automatically turn off.
As a safety feature, your coffeemaker will NOT start
again automatically the next day. If you want your
coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set
DELAY BREW, by repeating Steps 2 and 3 above.
To cancel DELAY BREW: Press the SELECT button three
times until all lights turn off (Figure 9).
Figure 9
17