Table of Contents
Advertisement
Quick Links
Wireless 5G HDMI Transmitter, Receiver & 4 Port Switch
With 1080p and 3D compatible
MODEL #: W-HDM3D5G-20M-KIT
© 2012 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no
representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the
right to make changes to specifications and product descriptions at any time without notice. No license, whether express, implied,
or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and
Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products of Avenview Inc. is strictly prohibited.
Page|1
www.avenview.com
Advertisement
Table of Contents
Related Manuals for Avenview W-HDM3D5G-20M-KIT
Summary of Contents for Avenview W-HDM3D5G-20M-KIT
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products of Avenview Inc.
-
Page 2: Table Of Contents
BEFORE INSTALLATION ..................... 6 APPLICATION DIAGRAM ....................7 PANEL DESCRIPTION ......................8 INSTALLATION FULL PACKAGE (W-HDM3D5G-20M) ............ 9 INSTALLATION FULL PACKAGE (W-HDM3D5G-20M-KIT) .......... 10 OPERATION (W-HDM3D5G-20M-KIT) ................10 IR REMOTE FUNCTIONS (W-HDM3D5G-20M-KIT) ............11 ADD OR DELETE TRANSMITTER ..................12 GENERAL TROUBLESHOOTING .................. -
Page 3: Section 1: Getting Started
Any other causes which does not relate to a product defect. Removal, installation, and set-up service charges. SAFETY INSTRUCTIONS W-HDM3D5G-20M-KIT The Avenview , Wireless Extender has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the W-HDM3D5G-20M-KIT should be used with care. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. Page|4 www.avenview.com... -
Page 5: Introduction
Supporting the point to point transmission function currently which can be expanded to the multi-point to point transmission function. Multi Input Switch to accommodate 4 Sources into the Transmitter PACKAGE CONTENTS Before you start the installation of W-HDM3D5G-20M-KIT, please check the B. FULL package contents. Wireless Transmitter Wireless Receiver 4 Port Switch Adapter... -
Page 6: Before Installation
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the HDMI cable. It can cause malfunction. Page|6 www.avenview.com... -
Page 7: Application Diagram
90 ˚ angle with the body of the unit. Each transmitter and receiver after pairing support only point to point operation. It cannot support signals broadcasting by wireless. Important before starting the insulation please ensure that all devices are powered off Page|7 www.avenview.com... -
Page 8: Panel Description
PANEL DESCRIPTION INPUT PANEL (Transmitter, W-HDM3D-20M-S) OUTPUT PANEL (Receiver, W-HDM3D-20M-R) Page|8 www.avenview.com... -
Page 9: Installation Full Package (W-Hdm3D5G-20M)
W-HDM5G-4X INSTALLATION FULL PACKAGE (W-HDM3D5G-20M) To setup Avenview W-HDM5G-20M-KIT please follow these steps for connecting to a device: 1. Place the Transmitter with 4 port unit in close proximity to the 4 HDMI source devices. 2. Connect all 4 HDMI sources to the 4 HDMI IN ports of the 4Port Switch connected to the Transmitter by using 4 standard HDMI cables. -
Page 10: Installation Full Package (W-Hdm3D5G-20M-Kit)
INSTALLATION FULL PACKAGE (W-HDM3D5G-20M-KIT) 1. Place the Transmitter unit in close proximity to the HDMI source device. 2. Connect the HDMI Switch to the Transmitter 3. Connect the HDMI source device to HDMI IN port of the Transmitter by using a standard HDMI cable. -
Page 11: Ir Remote Functions (W-Hdm3D5G-20M-Kit)
IR REMOTE FUNCTIONS (W-HDM3D5G-20M-KIT) BUTTON DESCRIPTION MENU Enter Setup Mode EXIT Exit Setup Mode SOURCE Wireless Transmitter List Searching and adding a new Wireless Transmitter DELETE Delete a Wireless Transmitter Enter or Confirm Function SHIFT Transmitter name character editing A1- A4 Switch 4 Video Source for Local HDMI Display B1 –... -
Page 12: Add Or Delete Transmitter
Use the supplied remote control to search and add a new transmitter or delete a Transmitter. First turn on your Wireless HDMI Transmitter and Receiver, Remote control point to Transmitter. Press the remote control MENU button, HDMI Display show. Page|12 www.avenview.com... -
Page 13: General Troubleshooting
DIMENSIONS (L X W X H) 11.5” x 1.3” x .5” POWER SUPPLY AC Input 100-240V,DC Output 5V ENVIRONMENTAL OPERATING 32˚ ~ 104˚F (0˚ to 40˚C) TEMPERATURE STORAGE TEMPERATURE -4˚ ~ 140˚F (-20˚ ~ 60˚C) RELATIVE HUMIDITY 20~90% RH (no condensation) Page|13 www.avenview.com... - Page 14 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission...
Need help?
Do you have a question about the W-HDM3D5G-20M-KIT and is the answer not in the manual?
Questions and answers