Table of Contents
Advertisement
Connections To A TV/VCR
1) Make sure all units are turned off.
2) Connect the camcorder to a TV or VCR using
the optional video and audio cables. If using
both TV and VCR, connect the VCR output to
the TV input.
3) Turn on all units. Set the VCR to its AUX input
mode, and set the TV to its VIDEO mode.
• Use the AC Adapter as the power supply.
• Be sure to adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
• If you have a TV or speakers that are not
specially shielded, do not place the speakers
adjacent to the TV as interference will occur in the
camcorder playback picture.
Connector cover
TV
VCR
White to
Audio
5
Output
Yellow to
Video
6
Output
A/V cable
(optional)
White to
Audio Input
Yellow to
Video Input
15
Tape Dubbing
1) Connect the camcorder and the VCR
(
"Connections To A TV/VCR"). Set the Power
!
Switch
to "PLAY" while pressing down the
0
Lock Button
located on the switch, turn on the
VCR's power, and insert the appropriate
cassettes in the camcorder and the VCR.
Engage the VCR's AUX and Record-Pause
modes.
%
2) Press 4/6
to find a spot just before the edit-
in point. Once it is reached, press 4/6
%
3) Press 4/6
and engage the VCR's Record
mode.
4) Engage the VCR's Record-Pause mode and
%
press 4/6
.
• Repeat steps 2) through 4) for additional editing,
then stop the VCR and camcorder when finished.
%
again.
Advertisement
Table of Contents
