JVC GR-AXM23 Instructions Manual page 19

FEATURE:
PURPOSE:
OPERATION:
RETAKE (R/F)
NOTE:
FEATURE:
PURPOSE:
OPERATION:
NOTE:
Quick Review
To check the end of the last record-
ing.
1) Press " " and release quickly
during the Record–Standby mode.
Tape is rewound for about 2
seconds and played back
automatically, then pauses in
Record–Standby mode for the
next shot.
Distortion may occur at start of
playback. This is normal.
Retake
To re-record certain segments.
1) Make sure the camcorder is in the
Record–Standby mode.
2) Press either RETAKE button to
reach the start point for new
recording. Pressing "F" forwards
the tape and pressing "R" reverses
it.
3) Press Recording Start/Stop Button
to start recording.
Noise may appear during Retake.
This is normal.
19
EN