Table of Contents
Advertisement
Zooming
To produce the zoom in/out effect. Digital circuitry
extends the maximum magnification offered by
optical zoom. This system is called Digital Zoom.
• Slide the Power Zoom Lever
zoom in, or "W" to zoom out.
• The further you slide the Power Zoom Lever
the quicker the zoom action.
• Focusing may become unstable during Zooming.
In this case, set the zoom while in Record–
Standby, lock the focus by using the manual focus
(
pg. 18, FOCUS in CAMERA MENU), then
zoom in or out in Record mode.
• The zoom level indicator
zoom. Once the zoom level indiator
reaches the top, all magnification from that point
is through digital processing.
• When using Digital Zoom, the quality of image
may suffer. To deactivate Digital Zoom, set
"D.ZOOM" (
pg. 20) to "OFF" in SYSTEM
MENU.
3
towards "T" to
3
5
-
moves during
5
-
Quick Review
To check the end of the last recording.
1) Make sure the camcorder is in the Record–
Standby mode.
@
2) Press 2
Tape is rewound for approx. 2 seconds and
,
played back automatically, then pauses in
Record–Standby mode for the next shot.
• Distortion may occur at the start of playback. This
is normal.
Retake
To re-record certain segments.
1) Make sure the camcorder is in the Record–
Standby mode.
2) Press and hold either RETAKE
the start point for new recording. Pressing 3
$
forwards the tape and pressing 2
reverses it.
3) Press the Recording Start/Stop Button
start recording.
• Noise bars appear and pictures may become
monochrome or darken during Retake. This is
normal.
13
and release quickly.
@
$
or
to reach
@
9
to
Advertisement
Table of Contents
