Advertisement
Make sure that the keyway and shaft are free from any dirt or burrs before fitting
the new seal.
Place the seal in position and tap evenly all round until seated. Replace the wash-
er, key and pulley and make sure that the grub screw in the pulley is tight.
GENERAL HINTS
1
When storing the Merry Tiller for long periods, make sure that the engine
is stored as per the instructions.
2
Make sure that all nuts and bolts are tight before and after use.
3
Do not carry out adjustments to the engine or clutch of the machine with
the engine running.
4
It is advisable to have your machine overhauled periodically by your deal-
er.
5
The life of your machine will be greatly improved if it is kept clean.
SECTION 4
GENERAL INFORMATION
Merry Tiller Major with Briggs and Stratton Engine. Engine power is 4 h.p. at
3,600 r.p.m. (American rating) Engine Capacity is 171 c.c. Tank Capacity is 5
pints petrol.
Merry Tiller Super Major with Briggs and Stratton Engine. Engine Power is 5 h.p.
at 3,600 r.p.m. (American rating). Engine Capacity is 206 c.c. Tank Capacity is 5
pints petrol.
Rotor speed on each machine is 118 r.p.m. at 3,600 r.p.m. at the engine.
Rotor speed on each machine is 80 r.p.m. at 2,500 r.p.m. at the engine.
All machines are fitted with recoil starters, two stage reduction chaincases with oil
bath lubrication. Final drive is by heavy duty rotor shaft.
Constructed in heavy gauge angle steel mounts, cast steel hitch Assembly and
heavy gauge steel tube handles.
SECTION 5
SPARE PARTS
When ordering spare parts make sure that you quote the Model, Part Number and
Description. This will help your dealer to supply the correct part quickly.
If the part that you require is not listed in this booklet due to changes which have
occurred in design, then your dealer has a complete master spare parts list and
can advise you accordingly.
Engine parts are not available from this factory and should be obtained from
Messrs Autocar Electrical Co. Ltd., Rippleside Trading Estate, Ripple Road, Bark-
ing, Essex., or their respective dealer in your area or from Briggs and Stratton.
This is a free download from
8
www.allotment-garden.org
TRANSPORT WHEEL ASSEMBLY
Item No. Part No.
Part Name
1
MT.2287
Hitch Casting
2
MT.2295
Rear Skid
3
MT.4576
Wheel
4
MT.3605
Wheel Frame Assembly
Comprises:
4a
MT.2290
Wheel Arch
4b
MT. 1561
Split Pin
4c
W/8/S.ZP
Washer
4d
MT.2506
Hitch Pin Assembly
This is a free download from
Quantity per Machine
9
www.allotment-garden.org
1
1
2
1
1
2
4
2
Hide quick links:
Advertisement
