Using The Cassette Adapter - JVC GR-AXM210 Instructions Manual

PLAYBACK

Using The Cassette Adapter

VCR
Compact video cassette
Recording safety hole
Compartment door
Sliding latch
Reels
Cassette Adapter (VHS Playpak)
Use this to play back a VHS-C video cassette recorded
with this camcorder on a VHS VCR. It is fully compatible
with any VHS video cassette recorder. The C-P7U adapter
is battery powered and automatically performs tape
loading and unloading.
1
INSERT BATTERY
Slide the battery cover up to remove it, and install
one "AA(R6)" size battery as shown in the
illustration at left, then reattach the cover.
2
INSERT CASSETTE IN ADAPTER
Slide the latch to open the adapter compartment
door, then insert the cassette and close the
compartment door.
3
PLAY BACK ON CONNECTED VCR
Load the cassette adapter into the VCR and play the
tape back as you would any other.
4
REMOVE CASSETTE FROM ADAPTER
Slide the latch and the compartment door opens
automatically. This may take around 10 seconds. Do
not attempt to force the adapter open. Then, insert
your finger in the hole on the underside of the
adapter as shown in the illustration at left, and push
up and remove the cassette.
NOTES:
During tape loading and unloading, do not touch the
reels for safety and tape protection.
During special-effect playback (slow motion, still frame,
etc.), the picture may vibrate or noise bars may appear
on the screen.
To record on a VCR using a compact cassette and the
adapter, cover the adapter's recording safety hole with
adhesive tape.
43
EN