LogicMark 30911 Operating Instructions Manual page 13

but resetting this is simple.
What to do:
1. Press the "SET UP" button on the BASE UNIT until the
2. Now press and hold the PANIC BUTTON and the TEST
What to expect:
The red light will go out on the BASE UNIT. This indicates
the PENDANT and the BASE UNIT are synchronized. At
this point, everything should be working fine.
If your Guardian Alert 911 is still not working, call our TECH
SUPPORT department at 703-934-7934.
Information The FCC Wants You To Know:
FCC ID: TYD30911
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Privacy of communications may not be ensured when using
this phone.
Operating Range:
The operating range of your Guardian Alert 911 will depend on many factors
including intervening walls, electrical interference or various appliances
such as vacuum cleaners, microwave ovens, mixers, coffee grinders, hair
dryers and other sources of electrical noise around the house.
red "SCANNING" light comes on. Release the SET UP
button.
BUTTON buttons (on the pendant) together until the
"SCANNING" light on the BASE UNIT turns off.
Guardian Alert 911
tm
13