Table of Contents
Advertisement
Quick Links
PTA
(POWER TOILET AID)
INSTRUCTIONS AND WARRANTY FOR
PTA MODELS MANUFACTURED
BY STAND AID
ASSEMBLY
INSTALLATION
REPLACEMENT PARTS
CAUTION:
All PTA models should be used only on level surfaces. Please exercise
SERIAL #___________
caution and good judgement.
POWER TOILET AID
READ complete manual
CAREFULLY BEFORE
attempting operation.
Advertisement
Table of Contents
Summary of Contents for Stand Aid of Iowa PTA
- Page 1 INSTRUCTIONS AND WARRANTY FOR PTA MODELS MANUFACTURED SERIAL #___________ BY STAND AID ASSEMBLY READ complete manual INSTALLATION CAREFULLY BEFORE REPLACEMENT PARTS attempting operation. CAUTION: All PTA models should be used only on level surfaces. Please exercise caution and good judgement.
-
Page 2: General Information
The PTA will help reduce stress on the knee and hip joints and is safe and comfortable for the user. Another benefit of the PTA is re- duced potential of back injuries among attendants caused by lifting patients. - Page 3 WHEN CALLING FOR SERVICE PLEASE HAVE THE SERIAL NUMBER OF YOUR UNIT READY FOR THE STAND AID REPRESENTATIVE THIS WILL HELP IN THE SERVICING OF YOUR PTA (Power Toilet Aid) THANK YOU. STAND AID SERVICE DEPARTMENT. TABLE OF CONTENTS Cover ................Page #1 Introduction and General Information ......
-
Page 4: Limited Warranty
LIMITED WARRANTY POWER TOILET AID (PTA) Each Stand Aid of Iowa, Inc. product has been carefully inspected and tested before shipment. Accordingly, we warrant each POWER TOILET AID which is sold against defects in workmanship and material under nor- mal use for life excluding the motor, drive train and electrical... -
Page 5: Safety Precautions
1. Keep small children away from PTA at all times. 2. The PTA should only be operated by authorized personnel. 3. If the PTA is not going to be used for a period of days, always disconnect the wiring harness from the battery. - Page 6 PTA PARTS BREAKDOWN and PARTS LIST REF. # PART # QTY. DESCRIPTION REF. # PART # QTY. DESCRIPTION 25003017 Battery 73002001 Bottom Base (18” Stand.) 25003018 Battery Charger 72002001 Bottom Base (14”) 26003017 Back Rest 72002R01 Bottom Base (18” mobile) **20.
- Page 7 3. The PTA must be raised a few inches for access to the securing holes. Push the control switch located in the end of arm rest up until PTA raises 4 or 5 inches. 4. The PTA is secured to the existing toilet. Remove the toilet seat from the existing toilet.
-
Page 8: Trouble Shooting
1. Remove battery from the box and place it into the battery pan located on the back side of PTA. Attach the battery lead to the main frame plug. Then push the lift switch button located on the left or right arm rest... - Page 9 . This model is provided with the locking caster wheels (#25) which thread up into the legs of the PTA as shown in the dia- gram on this page. This model also in- cludes the toilet seat (#20), and a waste container (#30).
Need help?
Do you have a question about the PTA and is the answer not in the manual?
Questions and answers