Motion Sensitivity; System Trigger Delay Setting; Email Alert - iFocus Pte Ltd DVR8A+ Manual

iFocus DVRA+/B+/E+ Manual Version 4.2

12.2.2 Motion Sensitivity

To cater for different environment application and maximize the motion trigger
function, iFocus DVR Motion Sensitivity can be set to [Low], [Mid] or [High] under
the Trigger Menu.
To set motion sensitivity for particular channel,
a. Press "3" for "Motion Properties Adj" under the Trigger Menu.
b. Use "F
c. Press "5" to select motion sensitivity setting
d. Use "F

12.2.3 System Trigger Delay Setting

The System Trigger Delay Setting is to set the delay for the timer. The recording will
stop after the delay timer is expired upon deactivation of Trigger. If the trigger is
activated within the count down delay time, the delay timer will restart from
beginning again. Trigger Delay time can be adjusted from 10 to 120 seconds.
12.3

Email Alert

The DVR can be programmed to send email to the users upon external trigger, motion
trigger or system events. Upon alert, the event name and four video frames (for motion
trigger events only) will be sent out. Refer to iFocus Remote Monitoring System User
Manual for the setup.
The email alert can be triggered by the following events:
Video Motion Detection (VMD) Alarm
External Trigger Alarm
System Event (video drop, record on, etc)
To program email alert upon external trigger 1 alarm, following parameters must be set:
IP address (under Communication Menu), refer to chapter 10
External Trigger for ARM events (under Trigger menu), refer to chapter 12
Trigger Recording (under Record Menu), refer to chapter 11
Recording (under Main Menu)
ARM (under Main Menu)
Arm delay is the time interval between arming and alarm
dial-out, which is adjustable for iFocus DVR.
To set arm delay,
a. Press "7" under Trigger Menu
b. Use "F " or "F
in
" or "F " key to select the channel
in out
" or "F " key to set different sensitivity
in out
" keys to change the setting
out
Page 29 of 40
Trigger Menu
1 External Trigger
2 Motion Trigger
3 Motion Properties Adj[Cam01]
4 --Motion Grid Setting
5 --Motion Sensitivity [High]
6 System Trigger Delay [120]
7 System Arm Delay [120]
0 Exit
Figure 40: Menu, Trigger
Menu (Arm Delay)