7. Throttle Body Clamp Set (14B-1351A-70)
Parts List
No.
PART No.
1
2
This part is used to enhance maintenance performance of the throttle body. Before using it, cut
off the protrusion for positioning bands at the cabjoint.
The part has a collar to prevent over-tightening. In normal cases, the part will not be tightened
till it reaches to the collar. Just manually tighten it.
Make sure to put a new band through a M5 x 0.8 tap before using it.
PART NAME
CLAMP COMP.
CLAMP COMP.
2
Cut it off
– 11 –
Q'TY
REMARKS
1
Right side (3-4)
1
Left side (1-2)
1