Advertisement
Quick Links
Ⅰ. Product function:
The XCM FPS Programmer can work on all FPS games and program specific settings. Not
only is it compatible with popular games like Modern Warfare, Battlefield, Call of Duty, Gears
TM
of War etc., but on all current Xbox 360
FPS games and the future first person shooter
games. It is the most powerful FPS gaming gear.
- Composed key function: you are able to map multi-keys (up to 8 keys) to anyone of the
single keys (A, B, X, Y, RT, LT etc, after mapping to this composed key), and those multi-keys
can be worked synchronously, sequence or in time interval by simply clicking the composed
key.
- Auto reloads: Gamers are able to set the auto reload function after a few shots or when it
runs out of bullets
TM
- Compatible with all versions of Xbox 360
consoles.
- Plug and play device.
TM
- Supports PS3
controller tilt function.
TM
TM
- Supports Xbox 360
wired controller and PS3
wired controller.
Ⅱ. Device introduction:
Advertisement
Summary of Contents for XCM Xbox 360
- Page 1 Ⅰ. Product function: The XCM FPS Programmer can work on all FPS games and program specific settings. Not only is it compatible with popular games like Modern Warfare, Battlefield, Call of Duty, Gears of War etc., but on all current Xbox 360 FPS games and the future first person shooter games.
- Page 2 <1>----USB plug Connect to Xbox 360 console. <2>----Turbo switch. ON—Turn on Rapid fire OFF—Turn off Rapid fire...
- Page 3 <10>---- Memory key- Mode C button <11>---- USB Port (Playstation3™ / Xbox 360™ wired controller plugs into this port.) Ⅲ. How to connect: Plug in the XCM FPS Programmer to the Xbox 360™/Xbox 360™Slimconsole. The diagram below shows you how to connect to the console:...
- Page 5 Wait until the Guide key stops blinking. Connection is successful. Ⅳ. How to use the tilt functionality: Tilt Function—Using the PS3™ Tilt function on Xbox 360™ console: (1) Turn on the TILT switch on the FPS Programmer to “L”. The PS3 controllers Tilt function replaces the Xbox 360 WIRED controller “Left”...
- Page 7 2. Press the M1 button (on the device) ,the M1 LED indicator lights up. 3. Press the A, B, X, Y keys on your controller, the A, B, X, Y keys lights up in order; the XCM FPS Programmer will store the setting in sequence and the length of pressing time. (Some actions may take 1-2 seconds to complete, in this case, if B key is acted as prone, it may take 2 seconds, you will need to press the B key for 2 seconds to set this motion).
- Page 8 The mapping steps are shown below: 1.Switch to Mode B <3> (on the XCM FPS programmer) 2.Press the M1 button (on the XCM FPS programmer). The M1 LED indicator is ON. 3.Press the A key on thexbox360 controller, the A key will operate the (A, B, X, Y) key function in...
- Page 9 RT button. The steps are shown below: 1.Press the “P” button on the XCM FPS Programmer device. The “P” LED indicator <7> will light up. 2.Press the Mode C button <10>. The C LED indicator <9> will light up.
- Page 10 How to use the Mode C <10>(Memory key): Simply press down the Mode C button. The C LED indicator <9> is ON and you are able to use this Memory key function by pressing the RT button (on the controller) for twice then release the RT button.
- Page 11 Ⅶ. Rapid fire (Turbo) function: Switch the Turbo (on the device) to ON, the rapid fire function is now enabled, if switch to OFF; the rapid fire function will be disabled. When the Rapid fire/Turbo function is switched on in ModeA, all the buttons inside the composed key has Rapid fire/Turbo function.
Need help?
Do you have a question about the Xbox 360 and is the answer not in the manual?
Questions and answers