All-Power SP-GMK049 Owner's Manual
  1. Manuals
  2. Brands
  3. All-Power Manuals
  4. Fishing Equipment
  5. SP-GMK049
  6. Owner's manual
All-Power SP-GMK049 Owner's Manual

All-Power SP-GMK049 Owner's Manual

2-stroke auger
Hide thumbs
Table of Contents

Advertisement

Quick Links

2-Stroke Auger
SP-GMK049
12/2012

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP-GMK049 and is the answer not in the manual?

Questions and answers

Summary of Contents for All-Power SP-GMK049

  • Page 1 2-Stroke Auger SP-GMK049 12/2012...

  • Page 2: Table Of Contents

    CONTENTS Preface Safety Precautions Warning Labels Safety Precautions Main Specifications Assembly 1.) Opening The Box 2.) Assembly 3.) Checking and Changing Bit Starting Fuel Mixture Starting The Engine Stoping The Engine Maintenance/Storage Troubleshooting Guide Failure To Start Lack Of Power Engine Stops While Running Hard To Stop Other...

  • Page 3: Preface

    PREFACE Dear users: Thank you for purchasing our Auger. Before using, please read this manual carefully to know well about the machine’s performance, so you can operate this machine safely and correctly. Please keep this manual handy so you can refer to it later.
  • Page 4 REFERENCE Screw Screw...
  • Page 5 REFERENCE Screw Gear Box Big Washer Screw Shock Absorber Pad Link Plank Gear Box Big Washer Screw A. Engine Assembly B. Gear Box Assembly C. Left Handle Bracket D. Right Handle Bracket E. Drill Bit F. Fuel Tank G. Fuel Tank Lid Comp H.
  • Page 6 REFERENCE Screw...
  • Page 7 REFERENCE CLOSE START STOP OPEN K. Fuel Mixture Bottle L. Oil Pumping Device M. Choke Lever N. Pull Start...
  • Page 8 REFERENCE GREASE...
  • Page 9 REFERENCE P. Air Filter Cartridge Q. Outside Cleaner Cover GREASE R. Fuel Filter S. Spark Plug T. Screw U. Spark Plug Cap V. Inserted Drill W. Hard Alloy Blade X. Carbide Blade Y. Stainless Steel Blade Z. Blade Positioning...

  • Page 10: Safety Precautions

    SAFETY PRECAUTIONS Warning! If used correctly, this Auger is a powerful, fast, high performance tool. If used improperly or without due precautions it could become a dangerous tool. Always comply with the safety rules and regulations throughout this manual. It is important that you read, fully understand and observe the following safety precautions and warnings.
  • Page 11 (3) Never wear scarves, bracelets or anything else which could get caught in the machine or bit. Wear close-fitting safety clothing. (4) Wear protective non-slip safety shoes, gloves, glasses, ear protection and a safety helmet. (5) Do not allow people near the machine while in use. (6) Do not start working until you have a clear work area.
  • Page 12 (20) Store the power drill off the ground, in a vertical position and in a dry place. Make sure the fuel tank is empty. (21) Check the power drill each day to ensure that each component is functional. (22) While working and moving from one work area to another make sure the engine is on the idle position.

  • Page 13: Main Specifications

    SPECIFICATIONS Name Power drill Model AG43J AG52J TAG52N SP-GMK049 Dimensions(LxWxH) 1240x280x280 Weight 14kg 15kg Reduction ratio 40:1 Speed-change Type Double-reduction Transmission Mode Centrufugal friction clutch Drill_Bits _6/_8/_10/_12/_15cm _6/_8/_10/_12/_15/_20cm Type Single Operated unit Type Air-cooled Two stroke engine Model 1E40F-5A 1E40FN...

  • Page 14: Assembly

    ASSEMBLY 1.) Open the box Remove the machine from the box, check the machine for damage, and make sure all the components are complete. (Fig.1) Page 2 . 2.) Assemble the machine a.) Rotate the machine by 90 degrees like (Fig.2), the air filter cover would be on the top side, use the accessory box to put under the gear case like (Fig.3) Page 2.

  • Page 15: Starting

    STARTING 1. Fuel Mixture Use a 2% or 4% (50:1 or 25:1) oil/gasoline mixture (Fig.10) (Please use fuel mixture of 25:1(gasoline:oil) 20 hours before the the machine runs.) Warning! 2-stroke engines have high specific horsepower and we recommend the use of regular or super unleaded gasoline, with or without lead and an octane rating of no less than 90.

  • Page 16: Stoping The Engine

    Note Do not use the choke (M , Fig.15. Fig.16) Page 5 when starting a hot engine. When the engine is idling, the bit should not turn. Warning! If the bit jams, stop the engine immediately. Note When pulling the pull start a) Do not let the starter grip snap back b) Do not pull the starter rope out all the way as it might break.
  • Page 17 ENGINE-Clean the cylinder fins with compressed air or a brush periodically. Overheating of engine may occur due to impurities in the cylinder. SPARK PLUG-Remove the spark plug cover, unscrew the spark plug. Clean the spark plug if carbon deposits are found. Polish the electrode with abrasive paper and adjust the electrode gap to 0.6-0.7mm (Fig.22) Page 6.

  • Page 18: Troubleshooting Guide

    TROUBLESHOOTING GUIDE 1) Starting Failure Trouble Sparking (no spark) Spark plug Causes 1.Spark plug is wet Clean and dry 2.Carbon deposit in the spark plug Clean Adjust gap at 0.6_0.7mm 3.The plug gap is too big or too small Replace 4.The electrode burned out 5.Insulation damage Replace...

  • Page 19: Lack Of Power

    TROUBLESHOOTING GUIDE 2) Lack of Power Trouble The compression is fine and has spark Causes Tighten it 1.Air in the fuel valve Change the gasket or tighten it 2.Air leak in carburetor connection Change the fuel 3.Fuel mixed with water Clean 4.The filter plate is clogged Clean...

  • Page 20: Hard To Stop

    TROUBLESHOOTING GUIDE Trouble The engine shuts down slowly Causes 1.Lack of fuel Fill the tank 2.Carburetor clogged Clean 3.Water in fuel Refill with fresh fuel 4) Engine hard to stop Trouble Engine Causes Clean carbon Cylinder and piston overheat Trouble Bad circuit Causes Clean plug &...

  • Page 21: Warranty

    WARRANTY Limited Warranty The manufacturer, acting through the sales and technical assistance network, shall replace free of charge any parts proven defective in material, machining or manufacturing in a period of 2 years from the date of purchase. The warranty does not affect the purchaser’s right as established under legislation governing the consequences of defects in the machine.

  • Page 22: Parts List

    Part List...
  • Page 23 GENERAL PARTS 51010100047 ENGINE ASSEMBLY 70080070035 GEAR BOX ASSEMBLY 2020050014 CLUTCH BOWL ASSEMBLY 70070080035 GEAR BOX HOUSING TOP 3060010004 POSITION PIN (4X10) 3090010012 BALL BEARING (6202-2RS/P5) 3120020004 HOLE CIRCLIP (_35) 3120010005 SHAFT CIRCLIP (_15) 80020030001 PRIMARY GEAR ASSEMBLY 70070080036 GEAR BOX HOUSING MIDDLE 3090010034 BALL BEARING (6201/P5) 80020030002...
  • Page 25 3020010014 SCREW (M5X20) 3040050022 WASHER (_5) 70030030717 ENGINE COVER 3130010013 SPARK PLUG 2020160191 TOP COVER 3010010062 SCREW (M5X20) 70070130003 CYLINDER 2070010021 GASKET-CYLINDER 2020020009 PISTON RING 2010020015 1-10 PISTON 3090020009 1-11 NEEDLE BEARING 2020150001 1-12 SNAP RING 2020010011 1-13 PISTON PIN 2020030014 1-14 STOP RING...
  • Page 26 2090010014 1-53 AIR FILTER ELEMENT 3020020031 1-54 BOLT ASSY (M5X60) 70030040071 1-55 COVER, CLEANER 70030070026 1-56 KNOB, COVER 2020120068 1-57 CRANK SHAFT ASSY 2070010111 1-58 GASKET, CRANKCASE 70070050006 1-59 REAR CRANKCASE 3100010025 1-60 OIL SEAL (12X28X7) 2050100010 1-61 STARTER PULLEY COMP 2050070004 1-62 STARTER COMP...

Table of Contents