Do you have a question about the PowerFlask and is the answer not in the manual?
Questions and answers
Summary of Contents for Digical Reasures PowerFlask
Page 2
Lightning Adapter Charging Cable Charging (For iPad 2/3 & (iPad 4, iPad mini, Cable iPhone 4/4S) & iPhone 5) PowerFlask Multi-Function Key (On/Off) 1 Amp Charging Indicator LED Capacity Indicator LEDs User Guide 1 Amp Output Port Micro USB Charging Port Dual-LED Flashlight 2.5 Amp Charging Indicator LED...
Page 3
Flashlight on or off. Capacity Indicator LEDs The Capacity Indicator LEDs show the charge level of the PowerFlask. Press and hold the Multi-Function Key to see the charge level. When the top light is flashing, it is time to recharge the PowerFlask.
Page 4
1) Plug the USB end of the USB-to Micro-USB cable into 2.5 Amp port on the top of the PowerFlask. NOTE: An iPad will not charge if it is plugged into the 1 Amp port. 2) Plug the Micro USB end of the cable into the included Apple 30-pin connector (iPad 3 or earlier) or the included Apple 8-pin Lightning connector (iPad 4 or iPad mini).
Page 5
A USB to two Micro USB cable is included with the PowerFlask that allows you to plug two devices into the 2.5 Amp port. It is best to use this cable only with the 2.5 Amp port, especially if you are charging one or more iPads.
Page 6
For Best Results: • Make sure the PowerFlask is fully charged before first use. • Each time you connect a device to the PowerFlask, check the device’s screen to verify that it is charging. • An iPad must be connected to the 2.5 Amp port to charge. An iPad will not charge if connected to the 1 Amp port.
• There are no user-serviceable parts inside the PowerFlask. It should only be opened or disassembled by a trained professional. • Do not expose to extreme heat or fire. • Do not expose to extreme humidity or water. • Do not throw, hit, or vibrate the PowerFlask.
Need help?
Do you have a question about the PowerFlask and is the answer not in the manual?
Questions and answers