JVC GR-AX26 Instructions Manual page 16

16
RETAKE (R/F)
RECORDING
FEATURE: Quick Review
PURPOSE: To check the end of the last record-
ing.
OPERATION: 1) Press "
during the Record–Standby mode.
•Tape is rewound for about 2
NOTE: Distortion may occur at start of
playback. This is normal.
FEATURE: Retake
PURPOSE: To re-record certain segments.
OPERATION: 1) Make sure the camcorder is in the
Record–Standby mode.
2) Press either RETAKE button to
reach the start point for new
recording.
Pressing "F" fast-forwards the tape
and pressing "R" reverses it.
3) Press Recording Start/Stop to start
recording.
Noise may appear during Retake.
NOTE:
This is normal.
Basic Features (cont.)
" and release quickly
seconds and played back
automatically, then pauses in
Record–Standby mode for the
next shot.