Mackie SR40-8 Service Manual page 9

CLEAR
• In Group Mode, used to turn off all active Groups. Press and hold CLEAR for two seconds,
then release to turn off all mutes on the console. This also indicates which Groups have
been programmed (programmed Groups' LEDs light up, unprogrammed Groups' LEDs do
not).
• In Group Preview Mode, clears all Groups currently being previewed.
• In Snapshot Mode, press and hold for two seconds to turn off all mutes on the console.
• In Snapshot Preview Mode, clears Snapshot currently being previewed.
• In Snapshot Mode, press and hold the CLEAR and Arrow Up buttons to enter Auto-Increment
(Load-and-Go) Mode. Then press DO IT to engage consecutive Snapshots.
• Press and hold the CLEAR and Arrow Down buttons to exit Auto-Increment Mode.
• Press to abort a store procedure.
• To clear all programmed mutes, in Group or Snapshot Mode, press and hold the CLEAR and
MODE buttons for two seconds.
DO IT
• In Snapshot Mode, press DO IT to engage the Snapshot selected in the Numeric Display.
• In Auto-Increment Mode, press to advance to the next Snapshot.
• In Preview Mode, press DO IT to engage the Group or Snapshot selected.
NUMBER BUTTONS (0-9)
• In Group Mode, press number buttons to select Groups to engage, preview, or program.
• In Snapshot Mode, press number buttons to select a two-digit Snapshot number to engage,
preview or program. For example, to select Snapshot 5, press "0" and "5." To select Snapshot
38, press "3" and "8."
TO CREATE A GROUP:
1. Press the MODE button to enter Group mode (one digit lights in the numeric display).
2. Select the Set in which to store the Group by pressing the Arrow Up/Down buttons.
3. Activate all the mute switches you wish to store in the Group.
4. Press STORE.
5.Press a number button 0-9 to select the Group in which to store the current mute configura-
tion.
TO CREATE A SNAPSHOT:
1. Press the MODE button to enter Snapshot mode (both digits light in the numeric display).
2. Select the Snapshot number in which to store the mute configuration by pressing the Arrow
Up/Down buttons, or by selecting the number using the number buttons 0-9.
3. Activate all mute switches you wish to store in the Snapshot.
4. Press STORE twice.
9