Error Messages - Acorn computer econet level 2/3 User Manual

Error messages

This is a list of the most common error messages that you may
receive at your station. If you get a message that is not listed
here, ask the network manager for help.
The numbers shown are the error numbers, in decimal. The
error number 168 has several different kinds of error associated
with it: this is simply because there are more possible errors
than available numbers. You can find out the individual error
number of a 168 error by using the operating system routine
OSWORD, which is described in the Econet Advanced user
guide. There is information on the meaning and use of error
numbers in the BBC Microcomputer System User Guide,
chapter 27; the network manager should have copies.
Already open
You have tried to open a file for random access writing
that has already been opened by you or another user.
Bad attribute
You have tried to set an access string that breaks the rules for
specifying access strings. Check the section on Protecting your
files.
Bad command
You have made a mistake entering a command: the system
does not recognise what you have typed in. Try again.
Bad file name
You have tried to give a file a name that breaks the rules for
filenames. Check the section on Naming files.
Bad password
Using *PASS, you have broken the rules for choosing passwords.
Look at the section on Passwords.
56
194
207
254
204
185