Camera Display - JVC Digital Video Camera GR-D34 Instructions Manual

MENUS FOR DETAILED ADJUSTMENT
16
EN
The "s" functions which are set when the Power Switch
is set to "M" are also applied when the Power Switch is
set to "PLAY".
[ ] = Factory-preset
BEEP
OFF: Turns off sounds when performing any operations.
It also deactivates the shutter sound effect, however the
shutter sound is recorded onto the tape during Snapshot
for Video Recording (
BEEP: The beep sounds when the power is turned on or
off, and at the beginning and end of recording. It also
activates the shutter sound effect. (
[MELODY]: Instead of a beep, a melody sounds when
any operation is performed. It also activates the shutter
sound effect. ( pg. 20)
DEMO MODE
OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as Program
AE with special effects, etc., and can be used to confirm
how these functions operate. Demonstration starts in the
following cases:
When the Menu Screen is closed after "DEMO MODE" is
turned "ON".
With "DEMO MODE" set to "ON", if there is no operation for
about 3 minutes after the Power Switch is set to "A" or "M".
Performing any operation during the demonstration stops
the demonstration temporarily. If no operation is
performed for more than 3 minutes after that, the
demonstration will resume.
NOTES:
If a cassette is in the camcorder, the demonstration cannot
be turned on.
"DEMO MODE" remains "ON" even if the camcorder power
is turned off.
If "DEMO MODE" remains "ON", some functions will not be
available. After viewing demo, set to "OFF".
PRIORITY
[LCD]: The image is displayed on the LCD monitor when
the viewfinder is pulled out while the LCD monitor is
opened.
FINDER: The image is displayed in the viewfinder when
the viewfinder is pulled out while the LCD monitor is
opened.
CAM RESET
EXECUTE: Resets all settings to the factory-preset.
RETURN: Does not reset all settings to the factory-
preset.
SYSTEM
pg. 20).
pg. 20)

CAMERA DISPLAY

The "n" (CAMERA DISPLAY) settings are effective even
when the Power Switch is set to "A". However, the menu
settings can be changed only when the Power Switch is set
to "M".
The "n" (CAMERA DISPLAY) settings are effective only
for shooting except "BRIGHT".
[ ] = Factory-preset
BRIGHT
pg. 9, "Brightness Adjustment Of The Display"
ON SCREEN
LCD: Keeps the camcorder's display (except the date,
time and time code) from appearing on the connected TV
screen.
[LCD/TV]: Makes the camcorder's display appear on
screen when the camcorder is connected to a TV.
DATE/TIME
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5 seconds
when the Power Switch is set from "OFF" to "A" or "M".
ON: The date/time is always displayed.
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on the
connected TV. Frame numbers are not displayed during
recording. ( pg. 11)
CLOCK ADJ.
pg. 8, "Date/Time Settings"