Canton Digital Movie 9 Operating Instructions Manual page 39

English
Problem
No playback via
Bluetooth.
38
Possible cause
1. there is no connection between the
DM System and the mobile end device.
2. the mobile end device is paired but
no playback takes place.
Solution
1. Connect your mobile end device as described.
2.1. the mobile end device must be connected again.
2.2. You are out of range.
2.3. Set the volume on the mobile end device to maximum.
2.4. increase the volume of the DM System.
2.5. ensure that interference sources like a WlAN router
or laptop are not set up in direct proximity of the DM
System.
2.6. Concurrent operation of WlAN and Bluetooth from a
mobile end device is not possible without interferences
in most cases (Disable WlAN at your mobile device).