Download Print this page

JVC HA-W700BT-C Instructions

Bluetooth stereo headset.
Hide thumbs
   

Advertisement

BLUETOOTH STEREO HEADSET
CASQUE STÉRÉO BLUETOOTH
CASCO CON AURICULARES ESTÉREO BLUETOOTH
HA-W700BT -J/C
INSTRUCTIONS
MANUEL D'INSTRUCTIONS
MANUAL DE INSTRUCCIONES
Printed in China
© 2007 Victor Company of Japan, Limited
LNT0091-001A
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including
interference that may cause undesired operation.
CAUTION: Changes or modifications not approved by JVC
could void user's authority to operate the equipment.
Contact
Address: JVC AMERICAS CORP.
JVC COMPANY OF AMERICA
1700 Valley Road, Wayne, N.J. 07470
Telephone: 1 (800) 252-5722
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, it may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
IC INFORMATION
INFORMATION SUR IC
This device complies with RSS-210 of the IC Rules. Operation is
Cet appareil est conforme à la RSS-210 du réglement de la IC.
subject to the following two conditions:
Le fonctionnement est sujet aux deux conditions suivantes:
(1) This device may not cause harmful interference
(1) Cet appareil ne peut causer d'interférences nuisi-bles
(2) This device must accept any interference received, including
(2) Cet appareil reçoit toute interférence même les interférences
interference that may cause undesired operation of the
qui peuvent occasioner un mauvais fonctionnement.
device.
ATTENTION: Les changements ou les modifications non
CAUTION: Changes or modifications not approved by JVC
approuvés par JVC risquent de retirer à l'utilisateur le droit
could void user's authority to operate the equipment.
d'utiliser l'appareil.
Contact
Contact
Address: JVC CANADA INC.
Adresse: JVC CANADA INC.
21 Finchdene Square, Toronto, ON M1X 1A7
21 Finchdene Square, Toronto, ON M1X 1A7
Telephone: (416) 293-1311
Téléphone: (416) 293-1311
e-mail: info@jvc.ca
e-mail: info@jvc.ca
Note: This equipment has been tested and found to comply
Remarque: L'appareil a été testé et jugé conforme aux limites
with the limits for a Class B digital device, pursuant to
des appareils numériques de classe B, aux termes de la
Industry Canada's RSS-210. These limits are designed to
réglementation RSS-210 de l'industrie du Canada. Ces limites
provide reasonable protection against harmful interference
ont pour but d'assurer une protection raisonnable contre les
in a residential installation. This equipment generates, uses
interférences parasites lorsque l'appareil est utilisé dans
and can radiate radio frequency energy and, if not installed
une installation résidentielle. Cet appareil engendre, utilise
and used in accordance with the instructions, it may cause
et peut émettre une énergie radioélectrique et, s'il n'est pas
harmful interference to radio communications. However, there
installé et utilisé en stricte conformité avec ces instructions, il
is no guarantee that interference will not occur in a particular
peut provoquer des interférences parasites dans les liaisons
installation. If this equipment does cause harmful interference to
radiophoniques. Ceci ne garantit pas pour autant qu'une
radio or television reception, which can be determined by turning
installation particulière n'émettra aucune interférence. Si
the equipment off and on, the user is encouraged to try to correct
l'appareil engendre des interférences parasites avec la réception
the interference by one or more of the following measures:
radio ou télévision, ce qui pourra être déterminé en éteignant
• Reorient or relocate the receiving antenna.
puis en rallumant l'appareil, il est conseillé à l'utilisateur
• Increase the separation between the equipment and receiver.
d'essayer de corriger les interférences en prenant l'une des
• Connect the equipment into an outlet on a circuit different
mesures ci-dessous:
from that to which the receiver is connected.
• Modifier l'orientation ou changer l'emplacement de l'antenne
• Consult the dealer or an experienced radio/TV technician for
de réception.
help.
• Eloigner davantage l'appareil du récepteur.
• Brancher l'appareil dans une prise d'un circuit différent de
celui auquel le récepteur est raccordé.
• Demander l'aide de son agent ou d'un technicien radio/
télévision qualifié.
ENGLISH
IMPORTANT
This product's performance would be degraded under a strong
CAUTION:
electro-static environment. And the function would be self-
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG
recoverable after the above case.
WITH AN EXTENSION CORD, RECEPTACLE OR OTHER
This product's performance would be degraded since the
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
disturbance from the mains cord. And the function would be self-
recoverable after the above case.
PREVENT BLADE EXPOSURE.
ATTENTION:
FRANÇAIS
POUR PREVENIR LES CHOCS ELECTRIQES NE PAS
Les performances de ce produit se détérioreront dans un
environnement fortement électro-statique. Par ailleurs, le
UTILISER CETTER FICHE AVEC UN PROLONGATEUR, UNE
PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT,
fonctionnement se restaurera de lui-même dans le cas ci-dessus.
SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND
Les performances de ce produit se détérioreront en cas
SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.
de perturbations du cordon d'alimentation. Par ailleurs, le
fonctionnement se restaurera de lui-même dans le cas ci-dessus.
ESPAÑOL
(1) This device may not cause interference.
El rendimiento de este producto puede deteriorarse en un entorno
(2) This device must accept any interference, including
con campos electrostáticos fuertes. El funcionamiento se repondrá
interference that may cause undesired operation of the device.
a la normalidad después del caso arriba mencionado.
(1) Ce produit ne cause pas d'interférence.
El rendimiento de este producto puede deteriorarse debido a las
(2) Ce produit doit accepte toute interférence, incluant
perturbaciones del cable de la red eléctrica. El funcionamiento se
interférence qui peut causé opération non désiré.
repondrá a la normalidad después del caso arriba mencionado.
Hearing Comfort and Well-Being
Traffic safety
• Do not play your personal audio at a high volume. Hearing
• Do not use while operating a motorized vehicle. It may create a
experts advice against continuous extended play.
traffic hazard and is illegal in many area.
• If you experience a ringing in your ears, reduce volume or
• You should use extreme caution or temporarily discontinue use
discontinue use.
in potentially hazardous situations.
• Even though your earphones are of the open-air type designed
to let you hear outside sounds, don't turn up the volume so
high that you can't hear what's around you.
English
Thank you for purchasing this JVC product. Before you begin operating this unit, please read the operating instructions carefully to be sure you get
the best possible performance. If you have any questions, consult your JVC dealer.
CAUTION
1. To reduce the risk of electrical shocks, fire, etc.:
6. For using the headphones...
● Do not remove screws, cover or cabinet.
● Attach the ear pieces firmly when replacing them; otherwise, the ear
● Do not expose this appliance to rain or moisture.
pieces may be left in your ears when taking the headphones off. If the
2. For your safety...
ear piece is left in your ear, be careful not to push it deep into the ear
● Never use the unit when driving a car, motorcycle, or bicycle. This
canal.
❏ Be careful not to apply the power that exceeds the headphones' input
could result in an accident.
● Pay special attention to traffic around you when using the
capacity. This may result in sound distortion and could damage the
headphones outside. Failure to do so could result in an accident.
oscillation board.
❏ Grasp and pull the plug itself to disconnect the headphones. Do not pull
● Be careful not to turn up the sound volume too high. Your hearing
can be damaged from listening to sounds at excessive volume for
on the cord.
❏ When the ear pieces get dirty, detach the ear pieces and wash them in
long periods.
● Do not disassemble or modify the unit.
water-diluted detergent. After washing, dry the ear pieces and attach to
● Do not allow flammable, water or metallic objects to enter the unit.
the headphones.
❏ Replace the ear pieces when: they lose its elasticity; they are stained
● If you find skin problems where the headphones are in contact
with the skin, stop using the headphones; otherwise, it may cause
badly; they are broken or deformed.
❏ The ear pieces will deteriorate with age even in normal use and
inflammation or irritation to the skin.
● In dry air such as in winter, you may feel a static shock when using
maintenance.
❏ Store the ear pieces in a place where children cannot reach to avoid the
the headphones.
3. Avoid using the headphones...
risk of the accident such as swallowing them.
● in places subject to excessive humidity or dust
● When using canal type headphones, you may hear the sound of cord
● in places subject to extremely high (over 40°C or 104°F) or low
rubbing together or the sound of vibrations which travels through your
(under 0°C or 32°F) temperatures
body when walking.
4. DO NOT leave the unit...
7. For safe use of battery...
● exposed to direct sunlight
● Use only the supplied charging unit to charge the battery.
● near a heater
● Be sure to use the supplied AC adaptor.
5. To protect the unit, DO NOT...
● There are no serviceable parts inside. Consult your dealer to replace
● allow them to get wet
the built-in battery.
● shake them or drop them against hard objects
● When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of these
batteries must be followed strictly.
Features
This unit is a wireless stereo headset using Bluetooth® wireless technology.
As Bluetooth Stereo Headset
As Bluetooth Receiver
Connection cord
Music
Call
Music & Call
(supplied) 0.7 m (2.3 ft)
Music
Audio in
Control
Control
Control
AC adaptor
Bluetooth cell phone
iPod with Bluetooth
Bluetooth cell
with music player
Transmitter (AA-T100BT)
phone
Bluetooth audio source
About Bluetooth
About pairing
Pairing creates a unique and encrypted link between two Bluetooth devices
and lets them communicate with each other. Bluetooth devices will not
work if the devices have not been paired.
Bluetooth is a short-range wireless radio communication technology for
the mobile device such as cellular phones, portable PCs, and other devices.
Cautions on Bluetooth communication
The Bluetooth devices can be connected without cables and communicate
• Microwaves emitted from Bluetooth devices may affect the operation
each other.
of electronic medical devices. Turn off this unit and other Bluetooth
About Bluetooth Profile
devices in hospitals, airplanes, trains, or crowding places.
• Bluetooth devices use 2.4 GHz band, which is the same as that used by
Bluetooth Profile designates the way of communication between Bluetooth
wireless LAN devices and microwave oven. Interference may occur
devices. The system supports the following Bluetooth Profiles.
near these devices and cause noise, disconnectivity, or a decrease of
A2DP: Advanced Audio Distribution Profile
communication speed.
The profile controls sending/receiving the high-quality audio contents.
AVRCP: Audio/Video Remote Control Profile
• Connection with all Bluetooth devices cannot be guaranteed.
Connectivity, operation, display indication or function may differ
The profile controls the functions of audio/video devices such as playing,
depending on the characteristics and specification of the devices.
stopping, pausing and volume control.
• Some Bluetooth devices take more time to establish connection.
HSP: Headset Profile
• To use the Bluetooth functions, the Bluetooth devices are required to be
The profile controlling the cell phone, and controlling the connection
between the devices.
compatible with the same Bluetooth profiles as this unit is. However, the
functions may not be available depending on the specifications of the
HFP: Hands-Free Profile
Bluetooth device even when it is compatible with the same profiles.
The profile controls the hands-free call with cell phone.
Parts name
1
(CALL) button
Controls the cellular phone calling through this unit.
2
2 Strap hole
3 Control switch (6 button, +/– buttons)
• 6 button: Controls the music player connected
with this unit.
345 6
• +/– buttons: Adjusts the volume level. When you
press + or – button with the highest or lowest
1
7
volume level, beep sound is heard.
4 Red lamp
Indicates the battery status of this unit.
5 Blue lamp
Indicates the communication status between this
unit and Bluetooth device.
6 Microphone
Picks up your voice when calling through this unit.
7 Stereo mini jack
8 Headphones
9 Battery charge terminal
p Clip
q
q POWER switch
8
9
p
Slides to turn on or off this unit.
Battery charging
Charge the built-in lithium-ion rechargeable battery first to use this unit.
1 Connect the AC adaptor to the charging unit.
• Do not use any AC adaptor other than the supplied one.
2 Connect the AC adaptor to the AC outlet.
3 Put the unit on the charging stand.
The red lamp lights up when the charging starts.
The blue lamp will light up when the charging is finished (the red lamp will
turn off).
Battery charge
• When the unit is turned off, it takes five hours to charge the battery to full
terminal
when it is empty.
• Disconnect the AC adaptor from the AC outlet when you do not use the
charging unit for a extended period of time.
• Do not pull the cord when disconnecting the AC adaptor.
• Do not handle the power cord with wet hands!
• Do not bend the power cord sharply.
• Checking the battery charge
Press the 6 button while holding the CALL button. (Press the 6
button within two seconds after pressing CALL button.) The red lamp
Red lamp
lights or flashes to show the battery remains.
Full
• The red lamp starts slow flashing automatically when the battery
become nearly empty.
●-●-●-●-●-●-●
Halfway
●-●------------●-●
Low
●---------------●
Need to charge
Registering a Bluetooth device – Pairing
You can register up to 8 Bluetooth devices to the unit.
3 Select "JVC HA-W700BT" on the target Bluetooth
• The device that has the oldest connection date will be overwritten when
device.
you register a 9th Bluetooth device.
4 Enter "0000" when the Pass code* is requested on the
Before pairing...
target Bluetooth device.
• Make sure that the unit is turned off.
• Turn on the target Bluetooth device and place it within 1 m from the
Pairing is finished when the red lamp goes out and the blue lamp
unit.
flashes three times repeatedly.
* also called as "pass key", "PIN code", "PIN number", etc.
1 Turn on the unit with pressing and holding the CALL
button to make it in the pairing mode.
5 Execute Bluetooth connection to the unit on the target
The blue lamp and the red lamp will start flashing continuously as the
Bluetooth device.
unit finds the target Bluetooth device (pairing mode). Release the CALL
The unit saves the target as the last connected Bluetooth device.
button after the flashing starts.
• Refer also to the instruction manual supplied for the target device.
• Finish the steps below within about 3 minutes after the flashing
• Some Bluetooth device will automatically connect with the unit after
starts (the pairing mode is automatically cancelled after the period).
pairing is finished.
Turn off the unit and start from step 1 again when you cannot finish
• When the connection is completed, the blue lamp flashes repeatedly.
the operation.
To pair with devices which cannot show the Bluetooth device list...
2 Execute pairing operation on the target Bluetooth device
On some Bluetooth devices, pairing may automatically be established by
to find the unit.
making both the unit and the target device in the pairing mode. Refer also
to the instruction manual supplied for the target device to make it in the
The device shows the list of Bluetooth devices found. The unit is
pairing mode.
recognized as "JVC HA-W700BT". Repeat from Step 1 again when
"JVC HA-W700BT" is not found.
• Refer also to the instruction manual supplied for the target device.
Calling through the unit
Preparation:
Listening to Music
• Activate the Bluetooth communication function on your cellular phone.
Preparation:
• Finish pairing between the unit and your cellular phone.
• Make sure that the Bluetooth device can transmit music through the
1 Turn on the unit.
Bluetooth connection (compatible with the A2DP profile of Bluetooth)
• Finish pairing between the unit and the Bluetooth device.
2 Execute the Bluetooth connection on the cellular phone.
• Turn on the Bluetooth device.
• Refer also to the instruction manual supplied for the cellular phone.
1 Turn on the unit.
• If the connection is not completed within five minutes, the unit
automatically turns off. In this case, turn the POWER switch to OFF
2 Execute the Bluetooth (A2DP) connection on the
and turn it back to ON, and then repeat the procedure from step 1.
Bluetooth device.
• When using a cellular phone supports both HFP and HSP Bluetooth
Profile, use HFP for this unit.
• When the connection is completed, the blue lamp flashes repeatedly.
• When the connection is completed, the blue lamp flashes repeatedly.
• Refer also to the instruction manual supplied for the target device.
• If the connection is not completed within five minutes, the unit
Basic controls available for the cellular phone connected with HFP:
automatically turns off. In this case, turn the POWER switch to OFF
and turn it back to ON, and then repeat the procedure from step 1.
Status
3 Start playback on the Bluetooth device.
• Refer also to the instruction manual supplied for the target device.
Waiting
• Set the connected Bluetooth device so that the device emits the sound
Dialing by
through the Bluetooth stereo headphones.
voice dialing
4 Adjust the volume by tilting the control switch up or
Calling
Optional (not supplied)
down.
Bluetooth Transmitter
Incoming
Basic controls available for the device:
(AA-T100BT)
Answering
Button
Press
Press and hold
6
Play/pause
Stop*
¢
Skip (to the next)*
Search (to forward)*
Basic controls available for the cellular phone connected with HSP:
4
Skip (to the previous)*
Search (to backward)*
* Not available for some devices.
Status
• You can perform some of the Bluetooth device operations with
the control switch of the unit if the device is compatible with the
Waiting
AVRCP profile. The operations you can do may vary depending on
Calling
the device you use. Refer also to the instruction manual supplied for
the target device to see the available operations.
Incoming
When using the unit as a Bluetooth receiver
Answering
The unit can be used as a Bluetooth receiver. Connect the PHONES
terminal on the unit to the external input terminal (ϕ3.5 mm stereo mini
jack) on the audio equipment using the supplied connection cord.
• When connecting to an RCA pin plug, use a cord separately purchased.
• These functions may not available for some cellular phones.
• Before connection, turn off the unit and the audio equipment.
• When answering a call on cellular phone, these functions may not
• Set the volume of the audio equipment to minimum before executing
work.
pairing or making connection between the unit and the audio
equipment.
To make a call while playing back music
When connecting the cellular phone by using HFP or HSP Bluetooth
To stop using the unit
Profile, you can make a call by using the cellular phone.
Disconnect the Bluetooth connection on the Bluetooth device and turn off
the unit.
To answer a call while playing back music
When a call comes in, the playback sound turns to ring tone. Press the
For the better sound and comfort fit of the headphones
CALL button to answer the call.
The medium-size ear pieces are attached to the supplied headphones
when purchased.
To finish the call
You may not enjoy the bass sound fully if the ear pieces are not fit
Press the CALL button. The playback sound comes back. (The playback
to your ears. To enjoy better sound while reducing sound leakage
sound may not come back in some cellular phone.)
and getting full noise canceling effect, choose the ear pieces from
the supplied three sizes (Small, Medium, or Large) and adjust their
positions to fit them to your ears.
LED flashing patterns
Status
Troubleshooting
Pairing
What appears to be trouble is not always serious. Check the following
points before consult your JVC dealer.
Waiting connection
Cannot pair the devices.
☞ You cannot pair the Bluetooth device having receiving function only.
☞ Bring the devices as closer as possible.
Communicating
Cannot connect the devices.
☞ Pairing is incomplete. Perform the pairing again.
☞ Check that the Bluetooth communication function is activated in the
Bluetooth device.
When you press the CALL button, the unit will search for the last
Specifications
connected Bluetooth device.
The sound is intermittent/The communication range is small.
General
☞ Although Bluetooth
®
wireless technology can transmit the contents
Bluetooth version: Bluetooth 2.0 certified
Output power: Bluetooth power class 2
within the range of approx. 10 m, obstacles (human bodies, metallic
objects, wall, etc.) or radiowave condition may affect the sound and
Service area: max. 10 m (10.9 yd.)*
* Communication range may vary depending on the environmental
decrease its range.
☞ The sound may be intermittent in the following cases. Avoid the
conditions.
following conditions when you use this unit.
Frequency band: 2.4 GHz (2.4000 GHz – 2.4835 GHz)
Bluetooth profile:
– Places where the wireless local area network is applied.
– Near the microwave oven.
A2DP (Advanced Audio Distribution Profile), AVRCP (Audio/Video
Remote Control Profile), HFP (Hands-free Profile), HSP (Headset
– Near the other Bluetooth devices.
– Places where the radiowave is used.
Profile)
No sound.
Supported Codec: SBC (Subband Codec)
☞ The connection between the Bluetooth device and this unit is
Power supply: Built-in lithium-ion rechargeable battery (DC 3.7 V)
incomplete. Connect the devices again.
Battery life*: Music play time: up to 11 hours
☞ The setting of the Bluetooth device is incorrect. Set the connected
Bluetooth device so that the device emits the sound through the
* Depends on use.
Bluetooth stereo headphones.
Mass: 35 g (1.23 oz.) (including headphones)
Headphones (J48139-001)
Frequency response: 10 Hz – 23,000 Hz
Battery disposal
Sensitivity: 103 dB/1 mW
Accessories
When disposing the unit, take off the built-in lithium-ion rechargeable
AC adaptor x 1 (S004CU0500050), Ear pieces 3 pairs (Small, Medium,
battery and dispose appropriately for environmental protection.
Large), Charging unit (J48140-001) x 1, Connection cord (0.7 m (2.3 ft.)
1. Take off the screws with the Phillips-
stereo mini plug - stereo mini plug)
head screwdriver.
Designs and specifications are subject to change without notice.
2. Open the case and use
● iPod is a trademark of Apple Inc., registered in the U.S. and other
scissors to cut the cords one
Battery level
countries.
by one to take off the battery.
Battery
● The Bluetooth® word mark and logos are registered trademarks owned
• Do not take off the battery from
by Bluetooth SIG, Inc. and any use of such marks by Victor Company
its case when you dispose of the
of Japan, Limited (JVC) is under license. Other trademarks and trade
battery.
names are those of their respective owners.
• Do not cut two cords at the same
time since it may cause a short-
circuit.
CALL button
Press
Press and hold
Start voice dialing
Redial
Cancel voice dialing
Cancel calling
Answer the call
Reject the call
Finish the call
Switch the device
(between cellular phone
and the unit)
CALL button
Press
Press and hold
Redial
Cancel calling
Cancel calling or switch
to the unit
Answer the call
Reject the call
Finish the call
Switch the device
(between cellular phone
and the unit)
LED
Flashing pattern
Blue
●-●-●-●-●-●-●-●-●-●-●-●-●-
●-●-●-●-●-●-●-●-●-●-●-●-●-
Red
Blue
●-●-●--------------●-●-●----------
Red
------------------------------------------
Blue
●---------------------●-----------------
Red
------------------------------------------
Standby time: up to 100 hours

Advertisement

   Related Manuals for JVC HA-W700BT-C

No related manuals

   Summary of Contents for JVC HA-W700BT-C

  • Page 1

    (1) This device may not cause harmful interference Thank you for purchasing this JVC product. Before you begin operating this unit, please read the operating instructions carefully to be sure you get (2) This device must accept any interference received, including the best possible performance.

  • Page 2

    • Le périphérique dont la date de connexion est la plus ancienne sera Nous vous félicitons d’avoir acquis ce produit JVC. Avant de vous en servir, lisez attentivement le mode d’emploi pour en obtenir les meilleures remplacé quand vous enregistrez un 9e périphérique Bluetooth.

This manual also for:

Ha-w700bt-j, Haw700bt - headset - in-ear ear-bud

Comments to this Manuals

Symbols: 0
Latest comments: