Porsche Cayenne Owner's Manual page 322

Wheel change
1. Remove the top wheel bolt with the wheel bolt
wrench from the tool kit.
322
Practical Tips, Minor Repairs
Screwing in assembly aid
2. Remove assembly aid from the tool kit and
screw in instead of the wheel bolt.
3. Remove the remaining wheel bolts.
Please observe the chapter "WHEEL BOLTS"
on Page 313.
4. Change wheel.
5. Insert wheel bolts and tighten by hand.
Remove assembly aid and screw in remaining
wheel bolt.
Initially tighten bolts in diagonally opposite
sequence so that the wheel is centered.
6. Inflate the tire if necessary.
Please observe the chapter "TIRE PRES-
SURES, COLD" on Page 385.
In vehicles with tire pressure monitoring:
Please observe the chapter "TIRE PRESSURE
MENU" on Page 104.
7. Lower car and remove jack.
8. Tighten wheel bolts in diagonally opposite
sequence.
Maintenance note
f Immediately after changing a wheel, use
a torque wrench to check the prescribed
tightening torque of the wheel bolts
(118 ftlb./160 Nm).