Table of Contents
Advertisement
Unfolding For Riding
2. Fold and lock the handlebar assembly
Swing the handlebar assembly and stem locking lever
into the up position (2a), then "snap" the locking lever
closed (2b).
With the stem locking lever in the closed position,
rotate the secondary safety lock counter clockwise to
secure the stem locking lever (2c).
Note — Always ensure the stem connection is properly
and tightly secured before riding.
Check locking lever and ensure it is properly secured
before riding. Adjust for proper tightness when neces-
sary. To adjust frame locking lever, slowly turn the ad-
justment bolt in the stem locking lever using a Phillips
head screwdriver in 1/16 increments.
effectively adjust the lever could result in the Stem
Locking Lever being too tight or too loose.
If the stem locking lever does not "snap" closed, it is in
need of adjustment.
3. Unfold and lock the pedals
The folded pedal is held in position by a spring loaded locking mechanism (3a).
Simply unfold the pedal and ensure it locks into its riding position (3b).
Release the pedal assembly making sure it locks into position to secure the pedal (3c).
Repeat for other pedal. Adjust the seat assembly for comfortable rider position as
described in this manual, never extending the seat post past the Minimum Insertion
mark. Always ensure the seat clamp is securely tightened before riding.
NOTE — This manual is only meant to act as a guide. KETTLER recommends that your bike
be regularly serviced by a qualified bike mechanic
3a
Failure to
3b
5
2a
2b
2c
3c
Advertisement
Table of Contents
