Page 4
INTRODUCTION Congratulations on your purchase of a Timex Medication Manager-Model number 80041 for the Daily Medication Manager or Model number 80040 for the Weekly Medication Manager. The Medication Managers are designed to help you take your medications on a timely manner with ease and confidence.
Page 6
Product should be returned to MEDport with proof of purchase and postage prepaid along with an explanation of the problem. TIMEX is a trademark of Timex Corporation. Manufactured and Distributed under license by: MEDport, LLC, 23 Acorn Street, Providence, RI 02903...
INSERTING BATTERIES Reset Button To insert batteries, slide open battery door and insert two (2) AAA size batteries making sure the negative (-) and positive (+) terminals are placed correctly. The product comes with 2 LR44 batteries (see illustration). To activate, pull and remove the insulation tab.
SETTING THE CLOCK Slide pill box to left. Lift the speaker & button cover on the face of the timer and press the MODE button to choose what function you want to set. While in the Time mode, press and hold the SET button for three (3) seconds.
TRAY INSTALLATION If you have purchased the Weekly Medication Manager Model #80040, you may want to mount the tray to a vertical surface such as a wall or cabinet door. The tray may also be used on a desk or countertop.
Page 10
been taken and ALARM STOP not pressed, the dosage will be considered "Missed". That dosage number will then be shown with an X (refer to illustration) and the Message "MISSED PILLBOX 1" will display on screen until it is time for next reminder. HISTORY After a minimum of 1 full day of reminders, you will be able to view HISTORY and can see what doses were missed.
SETTING THE TIMER You may now choose up to 4 time settings – one for each pillbox compartment. You will also have the option to set 2 additional alarms as personal reminders. These may be used to remind you to take a blood pressure reading, blood glucose test, etc…...
Page 12
When you need to delete a dosage time or make several changes for your dosages, you will need to make those changes in reverse order of setting, start with box 4, then 3, then 2 and finally 1. You can also just press the small RESET button on the back of the timer using a small tip pen or paper clip end (see battery changing illustrations).
SETTING ALARM TYPE There are three (3) alarm types to choose from: Beeping alarm – Indicated by a bell. Voice alarm – "TAKE PILLBOX 1" indicated by "Voice" and a bell. Silent – No alarms heard, only prompted by display. The alarm type can be changed at any time.
Need help?
Do you have a question about the MEDICATION MANAGER and is the answer not in the manual?
Questions and answers