Camera Housing - GoPro Hero4 Black User Manual

Slim housing closed

/ Camera Housing

Slim housing closed
ASSEMBLING THE CAMERA HOUSING
To Remove the Camera From the Housing:
1. Lift the front of the latch up to disengage it from the camera housing.
2. Pivot the latch backward and pull it up to release the backdoor.
Slim housing remove camera
3. Pull open the housing backdoor and remove the camera.
Slim housing remove camera
76
Swapping housing doors
Swapping housing doors
To Secure the Camera in the Housing:
1. Open the housing and drop the camera into position.
2. Make sure the seal around the backdoor is free of debris.
3. Close the housing backdoor and squeeze it closed to ensure a
Slim housing insert camera good seal.
4. Pivot the hinged arm backwards and hook the lip of the latch into
the grooved top of the housing backdoor.
5. Push the latch down to snap it into place.
Slim housing insert camera
WARNING: Always secure the camera in its housing when using
the camera in or around water. Do not get the camera or the
battery wet.
/ Camera Housing
77