How To Disinfect The Unit Each Day - Omron MicroAIR U22 Instruction Manual

Note: if the device is not cleaned and disinfected correctly and as frequently as indicated,
microorganisms may remain in the unit, causing risk of infection.
Before disinfection, always first clean the parts as described in the section "How to clean the unit after
each inhalation" on the previous page.
Disinfection of the individual parts can be done, using one of the following methods:
1. Disinfection by boiling.
other methods, as described below.
Mesh-cap, mouthpiece and mask-adapter can be disinfected by boiling in distilled water. After 10 to
free (paper) towel.
2. Disinfection by using alcohol.
All parts can be disinfected by using alcohol.
alcohol from the parts and let them air dry on a clean, lint free (paper) towel.
Alternatively, disinfect all parts by wiping them off with a lint-free cloth, soaked in alcohol.
3. Disinfection by commercially available disinfectant.
Note: Do NOT soak the main unit in any disinfectant.
For disinfection of the parts, refer to the instructions as supplied by the manufacturer of the
water from the parts and let them air dry on a clean, lint free (paper) towel.
17