System Requirements - DigiDesign ADAT Bridge I/O Manual

System Requirements

The Digidesign ADAT Bridge I/O requires:
• A Pro Tools 24 MIX or MIXplus,
Pro Tools 24 or Pro Tools III system, on
an appropriate Mac OS or Windows NT
CPU.
• Version 4.3 or higher of the Pro Tools
software and associated versions of DAE
and the DigiSystem INIT.
• An external mixing console and moni-
toring system (amplifier, speakers, head-
phones, etc.).
• One or more ADAT or ADAT-compatible
devices.
ADAT Firmware Requirements
To use your ADAT with the ADAT Bridge
I/O, it must have the following firmware
version. If you are not sure of the firmware
version of your ADAT or ADAT-compatible
recorder, please contact the manufacturer
or your professional audio dealer.
• The original ADAT should be equipped
with firmware version 4.03 or higher.
• The ADAT XT should be equipped with
firmware version 1.04 or higher.
• The ADAT M20 should be equipped with
firmware version 1.0 or higher.
• The ADAT XT20 should be equipped
with firmware version 2.0 or higher.
• The ADAT LX20 should be equipped
with firmware version 2.0 or higher.
Chapter 1: Introducing the 24-Bit ADAT Bridge I/O 3