Basic Operation - ICRealtime Mobile DVR Installation Instruction Manual

Mobile DVR Installation Instruction Guide
14 Backup

3.9.1 Basic Operation

3.9.1.1 Playback
There are various search modes: video type, channel number or time. The system can max display
128 files in one screen. You can use up/down button to turn page.
Select the file name and double click mouse (or click enter button), you can view file content.
3.9.1.2 Accurate playback
Input time (h/m/s) in the time column and then click playback button, system can operate accurate
playback.
3.9.1.3 Synchronized playback function when playback
During playback process, click numeral key, system can switch to the corresponding channel video of
the same time.
3.9.1.4 Digital zoom
When the system is in full-screen playback mode, drag your mouse in the screen to select a section
and then left click mouse to realize digital zoom. You can right click mouse to exit.
3.9.1.5 File backup
System supports backup operation during search. You can draw a √ before file name (multiple
choices). Then click backup button (Button 14 in Figure 3-9).
Note:
All the operations here (such as playback speed, channel, time and progress) have relationship with
hardware version. Some series DVRs do not support some functions or playback speeds.
If the search function is OK, then you can see the whole system is running properly.
Please refer to the Mobile DVR User's Manual for network setup and PTZ setup information.
3.10 FAQ
Q: I can not boot up the mobile DVR.
A: Please check power supply is proper or not. Then check the key power is open or not (ACC signal).
The device can boot up after you enabled the power.
Q: One channel video is missing in preview mode.
A: Please check corresponding channel signal input is proper or not.
Q: Device reboots frequently.
A: Please check your have installed HDD or not.
Q: Device does not delay but I have enabled key power (ACC) latch function.
A: Please check power cable and ACC signal cable connection is OK or not.
31