Tidying Cables - LG 23MT75D Owner's Manual

CAUTION
Disconnect the power first, and then move or
y
install the TV. Otherwise electric shock may
occur.
If you install the TV on a ceiling or slanted wall,
y
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel.
Do not over tighten the screws as this may cause
y
damage to the TV and void your warranty.
Use the screws and wall mounts that meet the
y
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
Screw length from outer surface of back cover
y
should be under 8mm.
wall mount Pad
wall mount Pad
Back Cover
Standard screw
: M4 x L10
NOTE
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit includes an installation manual
y
and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending on the
y
wall mount. Be sure to use the proper length.
For more information, refer to the instructions
y
supplied with the wall mount.
Back Cover
Max.8mm
ASSEMBLING AND PrEPArING

Tidying cables

1 Gather and bind the cables with the Cable Holder.
2 Place the cable on the hook located on the stand
base.
13
Cable Holder