Table of Contents
Advertisement
2) Set
Satellite
for the selected LNB.
– Select
No Satellite
(Available satellite will be searched in
– Select
User defined
– If you set to
Band,
User Band Frequency
Cable router you use). For details, read the manual of the Single
Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press
BACK/RETURN
6. Select
Auto Setup
7. Select
Search Mode
8. Set with
/
and press
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency for the selected satellite.
After settings, select
●
9. The confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
DVB-C, DVB-T, Analogue
1. Select
Auto Setup
2. Set
DVB-C Auto Setup Settings
(DVB-C)
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency in your country.
if you do not know the connected satellite.
to set
Test Transponder Frequency
Single
Cable, additional settings are required. Set
and
to store.
with
/
and press
/
Scan Mode
with
OK
to store.
Start scan
with
with
/
and press
with
- 80 -
Auto
Setup.)
PIN
(depending on the Single
OK
to access.
/
and press
OK
/
and press
OK
OK
to start
Auto
OK
to access.
/
/
/
and press
manually.
User
to access.
to search.
Setup.
OK
to store.
Hide quick links:
Advertisement
Table of Contents
