Installation; Installing The Battery; Installing The Antenna - Huawei FT2260 Connect Quick Start

Installation

Installing the Battery

 Note:

The system will stop charging the battery when the ambient temperature is outside of
the temperature range allowed for charging (14

When the power adapter is connected, the battery will automatically charge.

When fully charged, the battery will automatically stop charging.

Remove the battery if the device will be unused for a period exceeding 2 weeks.

The battery is intended for backup purposes only (in the event of a power failure).

The device takes 3.5 hours to charge fully. The charge time may be impacted by
environmental factors.

Talk time is about 2 hours and standby time is about 36 hours, but the actual values
vary with the network environment.
Remove the battery cover. Carefully insert the battery connection cable into the battery port. The
connection cable will click into place when correctly inserted. Place the battery in the battery slot
and return the battery cover.

Installing the Antenna

Make sure the device is turned off. Align the antenna with the antenna port on the device as
illustrated below. Screw the antenna into the port, ensuring that the connection is secure.
° °
F to 113 F).
3