Table of Contents
Advertisement
Sterilizing
Esterilização
8
IMPORTANT:
• Bottles, accessories, toys and other objects should
be cleaned before sterilizing.
• This sterilizer does not sterilize up to clinical
standards.
• Place the appliance on a flat and stable surface.
• Make sure the appliance and supply cord are out
of children's reach.
• Ensure drain plug is secured to prevent leaking
during sterilizing.
1.
Fill the water reservoir (13) to water level 3.
2.
Lock the water reservoir lid (14) into place on the
water reservoir (13) by twisting the double arrow
icon counterclockwise until the sterilizer icon
is aligned with the arrow
3.
Place the bottle tray (20) into the sterilizer base
(21).
• Place cleaned baby bottles upside down onto
the bottle tray (20).
4.
Place the accessory tray (19) over the bottles,
onto the top interior edge of the sterilizer base
(20).
• Place accessories disassembled on top of the
accessory tray (19).
5.
Cover with the sterilizer lid (18), slide sterilizer
towards the Oster
the sterilizer steam entry (23) engages with the
water reservoir steam guide (15).
6.
Plug the power supply cord into an electrical
outlet and press the on/off button
• A 1-second beep and power light will indicate
the Oster
Baby Nutricenter is on.
TM
7.
Press the steam button
• A 1-second beep and illuminated steam light
will indicate STERILIZING has begun. Sterilizing
can be stopped at any time by pressing the
steam button
WARNING:
During Steaming, the sterilizer
releases steam through the steam vent holes on
the top of the sterilizer lid.To avoid injury, keep
clear of the steam.
8.
STERILIZING is complete when a 3 second beep
is sounded and the steam light turns off.The Os-
ter
Baby Nutricenter System appliance is now
TM
in stand-by mode and the heating element is off.
9.
Press the on/off button
•The power light turns off, indicating that the
Oster
Baby Nutricenter System is off.
TM
10.Remove sterilized bottles and accessories as re-
quired for feeding.
sterilizing. Allow sufficient time for the sterilizer
lid, bottles and accessories to cool before han-
dling or use oven mitts to handle immediately.
11. Remove the drain plug (22) located on the bot-
tom of the sterilizer base (21) to release excess
condensation after sterilizing.
Sterilized water is hot. Allow water to cool before
draining.
at the base.
Baby Nutricenter base until
TM
(11).
(11).
(10).
WARNING
: Parts are hot after
WARNING
(10).
:
Advertisement
Table of Contents
