Table of Contents
Advertisement
Quick Links
PRODUCT REFERENCE GUIDE
graco/peg perego/britax car seat adaptor
Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this
guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all
the warnings and safety guidelines before use.
Retain this guide in a safe place for future reference.
© Copyright VE 2007
Due to our policy of continuous product
development, this product is constantly
evolving. It is possible that some features
or procedures outlined here have changed
since this document was written. If you are
unsure of any procedure shown here, please
contact us via email at info@valcobaby.com
or Canada customers can email canada@
valcobaby.com to obtain the most up to date
information before use. Include the batch
number, which can be found on a sticker on
the frame.
All pictures and diagrams herein are provided
for illustration purposes only. Actual product,
color or fabric may vary. VALCO reserves the
right to modify or alter any specification or
color without notice or obligation to modify
any product previously purchased
FURTHER INFORMATION
In North America only
www.valcobaby.com
1800 610 7850
In Canada only
416 488 1900
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Valco baby car seat adaptor
Summary of Contents for Valco baby car seat adaptor
- Page 1 PRODUCT REFERENCE GUIDE graco/peg perego/britax car seat adaptor Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use.
- Page 2 The following instructions are for the Valco Baby TriMode Models: for Use with graco Bumper Bar single/twin Nylon Plug car seat adaptor: If you haven’t already done so, remove the front bar or plugs from the nylon housings on either side of the stroller frame by pressing each inner ‘release...
- Page 3 Insert the Car Seat position the car seat so that the infant is facing the handlebar of the stroller. line up the car seat to the adaptor frame ensuring that the car seat latch (red lever on back of car seat) rests under the adaptor frame.
- Page 4 Male clip underneath the footrest of the stroller. Insert the Male clip into the Female clip, and secure. continue to follow the single graco car seat adaptor instructions step d to f. for Use with peg perego single/twin car seat adaptor:...
- Page 5 Insert the Adaptor Insert the car seat adaptor connecting pieces into the nylon housings. Be sure that the bar release button is securely in the housing. Insert the Car Seat position the car seat so the infant is facing the handlebar of the stroller.
- Page 6 (reversing the process outlined in d) and lift up the car seat to unlock it from the frame. to reMoVe the car seat adaptor: locate the two nylon release buttons that sit below the frame at each side of the stroller.
- Page 7 (reversing the process used in d) and lift up the car seat to unlock it from the frame. to reMoVe the car seat adaptor: locate the two nylon release buttons that sit below the frame at each side of the stroller.
- Page 8 Check all parts for breakage or fatigue before use. Discontinue immediately if any part is found to be damaged or broken. • Do not use this Car Seat Adaptor until you have read and understood all of the instructions. •...
Need help?
Do you have a question about the car seat adaptor and is the answer not in the manual?
Questions and answers