Samsung SPH-n400 Series User Manual page 84

2. Press . The Data/Fax In submenu appears in
the display.
3. Toggle down to highlight Fax Only.
4. Press to save.
In the Fax program on your PC setup Answer Mode. Click on
Receive and select either Automatic Receive
(recommended), or Manual Receive. Your phone is now
ready to receive an incoming fax.
Note: Once you have set your phone's mode to fax for next
call, you cannot receive regular voice calls until you
change back to voice calls only, or a fax is received.
Ending a fax or data call
Some of the common ways to end a call, like closing the
phone, will not end a fax or data call. Always close the
connection through the application on your computer, which
returns your phone to standby mode. Disconnecting the data
cable or turning off your phone will also end a data or fax call,
but it may disrupt your computer.
Sending a fax or data file
When connected to a computing device, your phone allows
wireless fax and data transmissions. Your computing device
software initiates the call to the destination phone number.
Your phone functions as a wireless modem to send the fax or
data file to the number designated by your PC software.
Changing your phone back to voice calling
1. In standby mode, press
Data/Fax menu.
74
to display the