Subscribe to Our Youtube Channel
Related Manuals for ProFusion PH-945
Summary of Contents for ProFusion PH-945
- Page 1 OWNER’S MANUAL GARAGE CEILING HEATER Technical Support: 1-866-206-0888 MODEL:PH-945...
- Page 2 SAFETY GUIDELINES 3 - 4 SPECIFICATIONS PARTS OF THE HEATER BEFORE INSTALLATION 8 - 9 INSTALLING INSTRUCTIONS OPERATING MAINTENANCE TROUBLESHOOTING MODEL:PH-945...
- Page 3 6. To disconnect heater, turn off power to heater circuit at the main disconnect panel. 7. Do not install less than 8’ ‘ ’ (2.4 m) high from the floor and closer than 3’ ’ ‘ ’ (0.9 m) from any vertical surfaces or walls. 052-2532-8 MODEL:PH-945...
- Page 4 14. For supply cables, use min. 10 AWG (5.3 mm ) copper wires. CAUTION! High temperature. Risk of fire. Keep electrical cords, drapery, furnishings, and other combustibles at least 3 (0.9 m) from the front of the ’ heater and away from the sides and rear. MODEL:PH-945...
- Page 5 Model: PH-945 Volt: 240 V Watts: 5000 W Frequency: 60 Hz BTU/h: 17,060 Recommended Heating Capacity: 1.25 Watts / cubic foot (0.03m Temperature control. Thermostat is an option item. It is not included with the heater. s n i l l a t...
- Page 6 NAME PART# Housing Safety grille Select switch: “Fan only” or “Fan and heater” MODEL:PH-945...
- Page 7 3’ (0.9 m) from the front of the heater and away from the sides and rear. WARNING! To reduce the risk of fire, do not store or use gasoline or other flammable vapors and liquids in the vicinity of the heater. MODEL:PH-945 052-2532-8...
- Page 8 Mark the drill-hole positions in the ceiling for the mounting bracket. Drill the required holes with diameter fit for the anchor provided for positioning the mounting bracket. Insert the anchors. Attach the mounting bracket to the ceiling and secure with mounting screws. MODEL:PH-945...
- Page 9 , including grounding wirings. After making the connections, arrange the pigtail leads of the unit and power supply wires in the wiring compartment. Secure the unit to the bracketwith screws. STEP 4 Replace the housing and secure with screws. MODEL:PH-945...
- Page 10 T . r c r i t i u a e r r e k r e s s e v e h t power disconnection means. MODEL:PH-945...
- Page 11 Be sure not to wet the heating element and the switches. Allow the unit to dry completely before using it. CAUTION! DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE HEATER AS THIS COULD E R I . T I MODEL:PH-945 052-2532-8...
- Page 12 3’ (0.9 m) from both sides enough space around the heater to and rear of heater to adjacent walls. the adjacent walls. PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF. DOING SO COULD CAUSE DAMAGE OR PERSONAL INJURY. MODEL:PH-945...
Need help?
Do you have a question about the PH-945 and is the answer not in the manual?
Questions and answers