Table of Contents
Advertisement
5. Insert the power cord into the monitor, then plug the monitor power cord and the
computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevan
national installation and or equipment regulations shall be considered. A certified powe
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IE
60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G0.75mm2) shall be used.
Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designatio
H05RR-F 3G 0.75mm2) shall be used.
6.
Assembled Line Cleaner as showed below.
7.
Power on the monitor and the computer.
1-6
Chapter 1.
Advertisement
Table of Contents
