Table of Contents
Advertisement
Powering the Downlink Kit
Option 1
• Connect a 1-cell (1S) Li-Po (not included) directly to the downlink kit.
Downlink kit
Option 2
• Using the included Y-harness, connect the downlink kit directly to the 1-cell (1S)
flight battery of your aircraft.
CAUTION: Always land the model before the battery reaches low voltage
cutoff (LVC), otherwise power will be lost to the receiver and camera.
Immediately land the model and disconnect the flight battery to prevent over-
discharge. Never use the included Y-harness with sailplane models.
Downlink Kit
Receiver board
1-cell (1S) Li-Po
(EFLB1501S45, EFLB1501S25)
Y-Harness
To Downlink Kit
To Receiver Board
7
1-Cell (1S) Li-Po
To Battery
EN
Advertisement
Table of Contents
