Control Settings - GE GFWS1705 Owner's Manual & Installation Instructions

Control settings.

3
4
(appearance will vary)
5
(appearance will vary)
6
(appearance will vary)
7
6
Add Steam (on some models)
Add Steam adds steam into the washer
to assist with loosening stains on the
Whites, Colors/Normal, Towels/Sheets,
Active Wear or Power Clean (depending
on model), Bulky Bedding or Sanitize
cycles.
Soil
Change the Soil level to increase or
decrease the wash time to remove
different amounts of soil.
Temp
Adjust to select the proper main water
temperature for the wash cycle. The
PreSoak and PreWash rinse water is
always cold to help reduce energy usage
and reduce setting of stains and wrinkles.
Follow the fabric manufacturer's care label
when selecting the wash temperature.
Spin
Changing the Spin speed changes the final
spin speed of the cycles. Always follow the
garment manufacturer's care label when
changing the Spin speed.
My Cycle
(on some models)
To save a favorite cycle, set the desired
settings for wash cycle, soil level, spin speed
and wash temp settings and hold down the
My Cycle button for 3 seconds. A beep will
sound to indicate the cycle has been saved.
To use your custom cycle, press the
My Cycle button before washing a load.
To change the saved cycle, set the desired
settings and hold down the
My Cycle button for 3 seconds.
To use:
1. Turn power ON and select a wash
cycle.
2. Select the Add Steam button to
activate steam.
3. Press the Start/Pause button.
To change the Soil level, press the Soil level
button until you have reached the desired
setting. You can choose between Extra
Light, Light, Normal, Heavy or Extra Heavy
soil levels.
To change the wash temperature, press
the wash Temp button until you have
reached the desired setting. You can
choose between Tap Cold, Cold, Warm,
Hot or Extra Hot (Extra Hot is available
on models equipped with a heater). By
design, to protect fabrics, not all wash
temperatures are available for certain
wash cycles.
NOTE: The first 10 seconds of the wash
fill is always cold. This feature assists in
conditioning the fabric and preventing
stains from setting on garments.
To change the Spin speed, press the Spin
speed button until you have reached the
desired setting. You can choose between
No Spin, Low, Medium, High or Max. Higher
spin speeds are not available on certain
cycles, such as Delicates.
Higher spin speeds remove more water
from the clothes and will help reduce dry
time, but may also increase the possibility
of setting wrinkles on some fabrics.
NOTE: When using My Cycle, wash
options cannot be modified after the
cycle has been started.
NOTE: If you change wash options with
My Cycle before starting the cycle, the
My Cycle light will turn off and you will
be returned to the base cycle.