Cisco E1200 Configuration Manual
Certified router
Hide thumbs
Also See for E1200:
- Setting up (6 pages) ,
- User manual (672 pages) ,
- Quick installation manual (80 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Cisco E1200
Summary of Contents for Cisco E1200
- Page 1 Linksys E1200 configuration guide certified router...
- Page 2 Linksys E1200 | Mac Method RingCentral certified router Configuring QoS on the Linksys E1200 Brand: Linksys Model: E1200 to Prioritize VoIP Traffic Hardware Version: E1200 (MAC Method) Firmware Version: 2.0.04 build 1 Log in to the router. The default IP address is 192.168.1.1.
- Page 3 Linksys E1200 | Mac Method RingCentral certified router Select “MAC Address” from the drop-down menu labeled “Category”. You will need the MAC address for each IP device to continue. In the field labeled “Enter a Name”, enter a unique name for the device for which you will prioritize traffic.
- Page 4 Linksys E1200 | Mac Method RingCentral certified router In the field labeled “Priority”, select “High” from the drop-down menu. Click “Apply” to save changes.
- Page 5 Linksys E1200 | Mac Method RingCentral certified router Repeat steps 6-10 until you have entered all of the IP phones. When all have been entered and you see them in the “Summary” section, click on “Save Settings”. Power cycle/reboot the router before proceeding.
- Page 6 Linksys E1200 | Port Method RingCentral certified router Configuring QoS on the Linksys E1200 to Prioritize VoIP Traffic (Port Method) Log in to the router. The default IP address is 192.168.1.1. The default username is “admin”. The default password is “admin”.
- Page 7 Linksys E1200 | Port Method RingCentral certified router In the “Category” section, select “Applications” from the drop-down menu. In the field labeled “Applications”, select “Add a New Application” from the drop-down menu. Enter a unique name in the “Enter a Name” field. Enter the following port ranges and select “UDP”...
- Page 8 Linksys E1200 | Port Method RingCentral certified router Click “Apply”. You will see your changes in the “Summary” section. Click “Save Settings”. Power cycle/reboot the router before proceeding.