1. Manuals
  2. Brands
  3. Mountain Trike Manuals
  4. Wheelchair
  5. MT3.001.0001
  6. Owner's manual

Mountain Trike MT3.001.0001 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MT3.001.0001 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mountain Trike MT3.001.0001

Summary of Contents for Mountain Trike MT3.001.0001

  • Page 2 Mountain Trike Owner’s Manual Issue 2...
  • Page 3 Mountain Trike; a complete list can be found on page 9. In case of a conflict between the instructions in this manual and information provided by a component manufacturer, always follow the component manufacturer’s...

  • Page 4: Introduction

    Mountain Trike, so you can get the most out of every ride. It is essential that you read this owner’s manual thoroughly before riding your Mountain Trike, we know you’re anxious to get riding, but it will only take a few minutes, and then you can unleash the full potential of your Mountain Trike.

  • Page 5: Table Of Contents

    Table of Contents Introduction A word about warnings, accidents and safety Think Safety A Special Note for Parents Your Mountain Trike Setting up your Mountain Trike Intended Operator Frame Size Arm Reach Assembly and Disassembly for Storage Seat Folding Folding the Rear Wheel...

  • Page 6: A Word About Warnings, Accidents And Safety

    Mountain Trike reduces risk of injury. If you crash or apply force that is higher than the limits of your Mountain Trike, you are very likely to cause damage to it or its parts. If your Mountain Trike has been damaged and you crash or load it again later, this additional impact or loading can cause a failure at a much lower load.

  • Page 7: Think Safety

    As a parent or guardian, you are responsible for the activities and safety of your minor child, and that includes making sure that the Mountain Trike is properly fitted to the child; that it is in good repair and safe operating condition; that you and your child have learned and understand the safe operation of the Mountain Trike.

  • Page 8: Your Mountain Trike

    The Mountain Trike is a manual all terrain wheelchair that gives unsurpassed performance on a variety of challenging types of terrain. In order to operate or ride the Mountain Trike safely and make best use of its features, certain levels of upper body, hand/grip strength and control are required.

  • Page 9: Frame Size

    To get the most enjoyment from riding your Mountain Trike, selecting the correct frame size adjustment is important. The Mountain Trike seat back rest has three settings, Small, Medium and Large, depending on your arm length. Your Mountain Trike Dealer will advise you on the correct seating position for you.

  • Page 10: Assembly And Disassembly For Storage

    Assembly and Disassembly for Storage The Mountain Trike is designed in such a way that, when folded, it will fit into the back of a car for easy transport or require as little space as possible for storage. If however the space available is severely restricted, further disassembly is possible, separating simply into three distinct modules: •...

  • Page 11: Seat Folding

    Issue 2 Seat Folding For efficient stowing of the Mountain Trike for transport or storage, remove the seat cushion and the seat back folds down flat against the base. To fold the seat back down, pull the cord joining the two locking pins and push seat forward. To restore the seat to its upright position, lift the seat back whilst pulling the cord, allowing the locking pins to retract.
  • Page 12 Mountain Trike Owner’s Manual Issue 2 Using the Quick Release (QR) Lever, located at the connection between the rear shock absorber and the rear swingarm, the rear shock absorber can be separated from the Rear Swing Arm, allowing the rear wheel and swing arm to fold underneath the seat. QR levers are designed such that reasonable hand/finger strength is sufficient to provide the required compression force upon flipping the lever closed.

  • Page 13: Drive Module Removal

    QR lever. Drive Module Removal If severe space restrictions exist, it is possible to save space and disassemble the Mountain Trike into its three main sub-assemblies or modules. The lever operated drive system on the Mountain Trike requires that the entire drive module is removed as a single piece including the wheel, drive system, suspension, lever and the brake.
  • Page 14 Mountain Trike Owner’s Manual Issue 2 Each drive module is attached using a four bolt clamp at the main pivot and a single bolt through the upper shock mount, shown (upside down) below and labelled in the previous diagram. These bolts are removed using the 5mm allen key provided.

  • Page 15: Removal Of Rear Wheel Steering Cable Attachment

    Mountain Trike Owner’s Manual Issue 2 Removal of Rear Wheel Steering Cable Attachment When attaching or removing the Drive Modules, consideration must be given to the connection of the two steering cables to the rear wheel. The Steering Cable Attachment must be removed with the Drive Module by pressing the spring loaded button that engages the Steering Cable Attachment onto the rear wheel fork.

  • Page 16: 2.0 Riding Instructions

    Issue 2 2.0 Riding Instructions The method of using a Mountain Trike is quite unlike any other wheelchair you may have used before. The propulsion and control systems are designed to be simple to use and intuitive and give the rider unsurpassed levels for ride and handling performance. However, it may take a few moments to become familiar with the controls upon your first try.

  • Page 17: Suspension

    Trike or could possible cause the rider to lose control and fall. Transferring in and out Due to the presence of the extra features and systems on a Mountain Trike, special care must be taken whilst transferring in and out. Whilst every effort has been made to make the transfer as straight forward as possible, some extra consideration should be made before first attempting to transfer.
  • Page 18 Ensure that the drive levers are laid down in the back position and are not obstructing the transfer in and out of the Mountain Trike. You may also wish to lift up the footrest to allow you to get closer to the front of the Trike.

  • Page 19: How To Engage / Disengage Drive

    90 degrees to lock it in its disengaged position. Once you have transferred and are happy in the Mountain Trike, it is time to engage the drive levers and release the parking brake, ready to propel the Trike.

  • Page 20: Forward Drive

    Mountain Trike Owner’s Manual Issue 2 Forward Drive The drive levers will propel the Trike forward by driving each of the two front wheels independently. Upon pushing the levers forward, the drive will engage, turning the wheels, resulting in forward motion. Upon pulling the levers back, the drive system allows the levers free motion to return before beginning another driving push.

  • Page 21: Steering

    Mountain Trike Owner’s Manual Issue 2 Steering Steering is achieved by pointing the steering handle in the direction that you want to go, turn it left to go left and right to go right. This turns the rear wheel like the rudder of a boat. Sounds simple? It is, but it can take a few moments to get used to.

  • Page 22: Braking

    Trike to change direction causing the rider to lose control and fall. Anti-tip wheels The anti-tip wheels at the front of the Mountain Trike are designed to prevent the rider from tipping too far forward and falling out when applying the brakes. The use of the optional seat belt may help riders feel more secure in the event of tipping.

  • Page 23: Descending Slopes

    Mountain Trike Owner’s Manual Issue 2 To begin climbing, position the Trike to approach the climb head on, rather than attempt to traverse at an angle – this can cause loss of traction. Once ready at the foot of the climb, make a smooth, even forward push on the drive levers, both levers at the same time.

  • Page 24: The Safety Bit

    Seat Belt and Foot Straps A seat belt and foot strap is also provided with your Mountain Trike as an optional extra should you so wish to use them. The seat belt can be attached at the fastening points either side of the bottom of the seat back and the foot strap can be attached between the two forward legs of the Mountain Trike frame.

  • Page 25: Riding Safely Off Road

    Mountain Trike Owner’s Manual Issue 2 5. Observe the Countryside Code with regards to other people and animals, give way to them 6. We do not recommend you do stunts, tricks, jumps etc, please think carefully about your skills, read section 3.5, and accept that this type of riding has associated higher risks.

  • Page 26: Wet Weather Riding

    Night Riding Your Mountain Trike does not come supplied with lights or approved reflectors. 1. Night riding presents increased risk over riding in the day as visibility is reduced.

  • Page 27: Adding Accessories And Changing Components

    Adding Accessories and Changing Components Many of the components on the Mountain Trike are standard mountain bike parts which may be changed if you wish. However, changing components is done so at your own risk as they may not have been tested by the manufacturer for compatibility or performance.

  • Page 28: 4.0 Service

    Following the bedding in period, discussed in 4.3, the Mountain Trike Company recommends a complete service by the Mountain Trike dealer every 6 months or 50 hours of riding, which ever comes sooner, or if any fault is suspected.

  • Page 29: Drive

    If you are in any doubt about performing a service task yourself, you must consult your Mountain Trike dealer before attempting the task or riding the Mountain Trike. Warning - The chain drive area carries the risk of trapping and pinching fingers and hands.
  • Page 30 Check the suspension is operating correctly by pushing down on the seat or frame, the shock absorbers should move smoothly. If the shock absorbers do not move freely, or appear to be seized seek the advice of your Mountain Trike dealer as the shocks are an item requiring specialist knowledge and tools to service.

  • Page 31: Brakes

    If the brake lever is rough, the bite point feels spongy or there is a reduction is braking power, seek the advice of your Mountain Trike dealer as the brakes require specialist knowledge and tools to service.

  • Page 32: Steering

    Check the operation of the Steering Unit engage and disengage system. The module should release easily and once engaged, be attached solidly with no looseness. If engaging or disengaging is difficult, or the Steering Unit is loose when engaged, seek the advice of your Mountain Trike dealer WARNING - Never ride your Mountain Trike if the steering cables are loose as this can result in poor steering response which could cause you to lose control and fall.

  • Page 33: Frame And Seat

    In the case of a crash or fall, thoroughly check the Mountain Trike for any damage. Following a crash, always report to your Mountain Trike dealer for a full check up before riding again. Never ride your Mountain Trike unless you are completely confident that it is in full working order.

  • Page 34: 5.0 Warranty

    Your warranty was automatically registered to you when you bought the Mountain Trike. Keep your receipt safe and you may wish to take a moment to write down your date of purchase, dealer details and Trike ID number on page 3 of this manual for your own records.
  • Page 35 The Mountain Trike Company Limited shall not be responsible for incidental or consequential damages. Claims under this warranty are to be made through an authorised Mountain Trike dealer. The complete Mountain Trike must be returned at owner’s expense via the authorised Mountain Trike dealer to allow inspection of all the components and parts.
  • Page 36 Mountain Trike Owner’s Manual Issue 2...
  • Page 37 Mountain Trike Owner’s Manual Issue 2...

Table of Contents