Skipped Stitches; Needle Breaks - New Home 535 Manual Instruction

CONTINUED
SUGGESTIONS FOR SMOOTH SEWING

Skipped Stitches

A bent or blunt pointed needle is often the cause of this. See that the needle is accurately inserted.
Remove the needle plate, and, after ascertaining that the feed is clean and working freely, reset the
needle plate.

Needle Breaks

See that the needle is not bent and avoid pulling the material when stitching; either condition will
cause the needle to strike on the needle plate and break.
Material Puckers
This is generally due to incorrect tension. See that both the bobbin case and the needle are properly
threaded; that the thread used is of good quality and the correct size for the needle.
Stitches Loop
This is regulated by the tensions. See that both the bobbin case and the needle are properly threaded;
that the thread used is of good quality and the correct size for the needle.