Related Manuals for Zypher AK7000 Series
Summary of Contents for Zypher AK7000 Series
-
Page 3: Installation
INSTALLATION INSTALLATION MOUNT HEIGHTS DUCTING Minimum mount height between range top to WARNING FIRE HAZARD hood bottom should be no less than 24". NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling,attics or Maximum mount height should be no higher garages. -
Page 4: Specifications
INSTALLATION INSTALLATION SPECIFICATIONS MOUNTING THE RANGEHOOD ELECTRICAL WARNING 12" All Electrical work must by performed by qualified electrician or person with similar technical 1/2" Elec K.O. know how and background. For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use extension cord or adapter plug with this appliance. - Page 5 INSTALLATION INSTALLATION MOUNTING THE RANGEHOOD CONVERTIBLE OPTIONS This range hood is equipped with the option of a 6” vertical discharge, 3 1/4”x10” vertical discharge, 1. This range hood is mounted under a or 3 1/4”x10” rear discharge. Additional accessories are provided to convert to either of the above kitchen cabinet unit.
- Page 9 Troubleshooting Procedures for AK7500, AK700 Issue Cause What to do 1. The power source is not turned ON. 1. Make sure the circuit breaker and the After installation, the unit unit’s power is ON. doesn’t work? 2. The power line and the cable locking 2.
Need help?
Do you have a question about the AK7000 Series and is the answer not in the manual?
Questions and answers