Side Discharge Of The Clippings - Dixon 4000 Series Operator's Manual

Ztr mowers
Hide thumbs Also See for 4000 Series:
Table of Contents

Advertisement

OPERATION INSTRUCTIONS

SIDE DISCHARGE OF THE CLIPPINGS:

In order to achieve optimum performance when side discharging the grass clippings, please read
and follow the tips listed below.
Additional information can be found in the troubleshooting guide.
CAUTION
1. Set engine speed control to the wide open or full setting.
2. Do Not Attempt To Cut Grass When It Is Wet. Wet grass will clog the underside of the
deck and discharge area.
3. If the grass is tall, place the mower deck cut height lever in the top or second notch. Initially
overlap cutting swaths instead of a full swath with each pass. Some applications may
require a second cutting.
4. Keep The Underside Of The Mower Deck Clean. Frequent removal of dried grass and dirt
will allow the clippings to discharge correctly.
5. Maintain Sharp Blades Throughout The Cutting Season.
GRASS HEIGHT SUGGESTIONS:
Correct mowing height can reduce weeds and disease by 5O to 8O %
The following grass cut heights are based on adequate moisture conditions and normal thatch
buildup in a healthy lawn. Some locations and applications may require slightly different cut
heights. If in doubt, consult your local lawn professional for assistance.
Be sure that deflector is properly installed on the
Grass Types:
Zoysia
Blue Grass
Fescue Blends
St. Augustine [Mid South]
St. Augustine [Deep South]
Tifton Bermuda
Centipede
Common Bermuda
Bahia/Argentina/Pensacola
discharge chute.
Best Cut Heights
2" - 2 1/2"
1 1/2"- 3 "
1 1/2"- 3 "
11/2"- 2 "
3" - 4 "
1 1/2"
1 1/2"- 2 "
1 1/2"- 2 "
2"
;
Page 21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ztr 4424Ztr 4423

Table of Contents