LAMAR LS 70 Owner's Manual page 13

Attach the Free Motion Assembly to the Vertical Upright
Figure #6
12
50
40
Assembly Hardware Required:
#37 Button Head Allen Screw
#40 Button Head Allen Screw
Assembly Description:
A) Align the mounting holes of the Free Motion Assembly (#12) with the lower mounting holes of the Vertical
Upright (#4) and secure the assembly in place using back-to-front positioned hardware; 2-Button Head Allen
Screws (#40), 4-Flat Washers (#50), and 2-Nylon Nuts (#55). Using the side mounting holes add 1-Button Head
Allen Screw, (#37), 2-Flat Washers (#50), and 1-Nylon Nut (#55) . (Reference Figure #6)
Assembly Stage #4 completed (Reference Figure #)
♦
A
SSEMBLY STAGE
50
55
55
50
50
37
Qty. 1
Qty. 2
# 4
#50 Flat Washer
#54 Nylon Nut
Figure #6
Qty. 6
Qty. 3