Mercury 2005 Mountaineer Owner's Manual page 41

Climate Controls
6. : Distributes outside air through the windshield defroster vents.
7. : Distributes outside air through the windshield defroster vents
and floor vents.
8. : Distributes outside air through the floor vents.
9. : Distributes outside air through the instrument panel vents and
the floor vents.
10. : Distributes outside air through the instrument panel vents.
11. OFF: Outside air is shut out and
OFF
the fan will not operate.
12. AUTO: Press to select the
AUTO
desired temperature shown in the
display window. The system will
automatically determine the fan speed, airflow location, outside or
recirculated air to heat or cool the vehicle to the selected temperature.
13. Manual override controls:
OFF
Allows you to manually determine
where airflow is directed. To return
to fully automatic control, press AUTO.
14. Driver's side temperature
control: Controls the temperature
on the driver side of the vehicle.
15. Fan Speed: Used to manually
enable or disable the fan speed.
16. EXT: Displays the outside air
EXT
temperature. It will remain
displayed until the EXT control is
pressed again. The external temperature will be most accurate when the
vehicle has been moving for a period of time.
17. Temperature conversion:
F C
Press to toggle between Fahrenheit
and Celsius temperature on the
DATC display only. The set point temperatures in Celsius will be
displayed in half-degree increments.
40
2005 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA (fus)