Safety release Conversion to transport position Replacement of blades Manual adjustment of stubble height Blades for short stubble Lubrication Assembly of guard Warranty IMPORTANT! Retighten the bolts of your new machine after a few hours work. PIGB-085X-05 CM 170/CM 190 0410...
Page 4
Turnable guide shoes Standard Standard PTO-shaft with free-wheel Standard Standard Safety canvas, better than norm, 1000 Standard Standard Window open 92,5 dB(A) 92,5 dB(A) Noise level in tractor cabin Window closed 76,5 dB(A) 76,5 dB(A) PIGB-085X-05 CM 170/CM 190 0410...
Page 5
CM 170 / CM190 Fig. 1 Fig. 2 Fig. 3 Fig. 4 PIGB-085X-05 CM 170/CM 190 0410...
After shortening the tube and shaft ends are rounded by a file and cleaned. Then the tubes are lubricated. Fig. 4 The spindle for the right lift arm is adjusted so that the lifted machine hangs straight. PIGB-085X-05 CM 170/CM 190 0410...
Page 7
CM 170 / CM190 Fig. 5 Fig. 6 F kg Fig. 7 Fig. 8 Fig. 9 PIGB-085X-05 CM 170/CM 190 0410...
4. Let go of the string and drive on until dowel is engaged. 5. Lift the machine. Make sure that no persons are near machine and tractor. 6. Test if the dowel is correctly engaged before driving on public roads PIGB-085X-05 CM 170/CM 190 0410...
Page 9
CM 170 / CM190 Fig. 10 Fig. 11 Fig. 13 Fig. 12 PIGB-085X-05 CM 170/CM 190 0410...
The guide shoe can be dismounted by removing 6 screws. Washer: 2320-098X (CM 170) 2320-374X (CM 190) BLADE FOR SHORT STUBBLE FIG. 13 To be used in crops where shorter stubble is required. Right blade Order no. 1380-0023 Left blade Order no. 1380-0024. PIGB-085X-05 CM 170/CM 190 0410...
Page 11
CM 170 / CM190 Fig. 14 PIGB-085X-05 CM 170/CM 190 0410...
Page 12
The gearbox is filled with "Shell Alvania RO" special grease. It is unnecessary to check the grease level. If - after repair - refilling of grease is required only that grease must be used. Refill to the shaft's underside. PIGB-085X-05 CM 170/CM 190 0410...
Page 13
CM 170 / CM190 CM 170 / CM190 CM 190 ASSEMBLY OF PROTECTION PIGB-085X-05 CM 170/CM 190 0410 PIGB-085X-05 CM 170/CM 190 0410...
Page 14
CM 170 / CM190 CM 170 ASSEMBLY OF PROTECTION PIGB-085X-05 CM 170/CM 190 0410...
Page 15
WARRANTY JF-Fabriken - J. Freudendahl A/S, 6400 Sønderborg, Denmark, hereafter called "JF", grants warranty to any buyer of new JF-STOLL machines from authorized JF-STOLL dealers. The warranty covers remedy of material and production faults. This warranty is valid within a year after date of sale to end-user.
Page 16
No matter which type of JF-STOLL- machine you chose, you can be sure to obtain the best result to obtain a top result - in the shape of high performance and...
Need help?
Do you have a question about the CM 170 and is the answer not in the manual?
Questions and answers