Porsche Boxster 2006 Owner's Manual page 243

6. Take the wheel off and put a new wheel on.
7. Please observe the chapter "WHEEL BOLTS"
on Page 241.
Screw in wheel bolts; remove assembly aids
and screw in the remaining wheel bolts. Initially
tighten bolts in diagonally opposite sequence
so that the wheel is centered.
8. Lower the car completely.
9. Tighten wheel bolts in diagonally opposite
sequence.
Immediately after changing a wheel, use a
torque wrench to check the prescribed
tightening torque (130 Nm/96 ftlb.).
243
Practical Tips, Emergency Service