Bloomberg Keyboard Setup; Keyboard Installation With Kvm Support - Blomberg KEYBOARD 4 Installation And Reference Manual

BLOOMBERG
KEYBOARD
SETUP
BLOOMBERG PROFESSIONAL
SERVICE CONFIGURATION
» Download and Install the Bloomberg Professional
Application from bloombergsoftware.com.
» Launch the Bloomberg Professional service.
» Type Alt-D to bring up the Terminal Defaults menu.
You do not need to be logged in to adjust this setting.
» Select the General Tab.
» Select Bloomberg Keyboard option under the Keyboard
type dropdown menu.
» Click OK.

KEYBOARD INSTALLATION WITH KVM SUPPORT

The Bloomberg Keyboard 4 is compatible with KVM switch boxes that support a standard USB Keyboard HID interface.
To install with your KVM switch box please follow the process below.
KEYBOARD INSTALLATION
» Connect the USB Cable to an available PC or self-powered
hub USB port.
» Allow Windows to install the appropriate in box drivers.
» If upgrading from a previous Bloomberg Keyboard, restart
the Bloomberg application.
KVM PC
» Order or Request a Bloomberg Keyboard 4
KVM Cable (Molex 88732-8802).
» Turn over the keyboard and remove the cable cover.
» Unplug the rubber KVM port cover.
» Connect the Mini-B end of the KVM Cable to the
KVM Port.
» Route the cable through the channel in the
keyboard base.
» Reinstall the cable cover and turn the keyboard over.
» Plug the KVM Cable into the Keyboard port on the
KVM Switchbox.
» Wait for the Caps, Num and Scroll Lock LEDs to flash.
» Plug the remaining USB cable directly into the PC that
will be running the Bloomberg Professional application.
» Allow Windows to install the appropriate in box drivers.
» If upgrading from a previous Bloomberg Keyboard,
restart the Bloomberg application.
INSTALLATION & REFERENCE GUIDE // 03