Tower Hobbies AC/DC PEAK CHARGER Instruction Manual

AC/DC PEAK CHARGER

INSTRUCTION MANUAL

The Tower Hobbies AC/DC Peak Charger is designed for peak
charging of nickel-cadmium (NiCd) and nickel-metal hydride (NiMH)
batteries, and perfect for entry-level electric car or boat modelers.
Power can be supplied from household 110V AC power, or a portable
12V DC power source. Charge current is selectable from 1 to 4 amps,
for cells as small as 600mAh "AAA" and as big as sub-C size, making
it equally as useful for 1/18th to 1/8th scale electric models. It can
even charge radio batteries!
It is strongly recommended to completely read this manual before use! Damage resulting from misuse
or modification will void your warranty.

SPECIFICATIONS

AC input:
DC input:
Battery types:
Battery capacity range:
Fast charge current:
Fast charge termination:
Fast charge safety timer:
Peak sensitivity:
Auto-trickle current:
Controls:
LED indicator:
Output connections*:
Protective devices:
Case size:
Weight:
*
Charge adapters available separately:
• Standard to Vendetta ™ , Mini Quake
®
• Standard to Futaba Tx Charge Jack (DTXP4151)
• Standard to Airtronics ® /Hitec
• Standard to JR ® /Spektrum
® ®
• Standard to Deans Ultra

SPECIAL FEATURES

• Tiny, lightweight built-in switching AC power supply is great for portability and small pit areas.
• Selectable charge currents of 1A, 2A, and 4 amps with auto-trickle function.
• Peak detection intelligence eliminates the need for tracking the charge state of the battery before charge, and an
automatic trickle charge tops off packs to maximum power.
• An auto-start function with status LED make setup and use a snap.
• Compatible with nickel-cadmium (NiCd) and nickel-metal hydride (NiMH) battery types.
• Includes a built-in socket for charging 4- or 5-cell receiver batteries, and even 8 cell transmitter batteries.
• A DC power lead with alligator clips easily connects to many types of 12V DC power sources.
• Solid-state reverse polarity and current overload safety devices ensure trouble-free operation.
110V AC 60Hz
11-15V DC, built-in lead with alligator clips
4-8 NiCd or NiMH Cells (4.8-9.6V, limited to 7 cells on DC)
600-6000mAh
1, 2, or 4A linear (2A limit on AC)
peak detection
90 minutes
8mV
1/20 fast charge setting
auto-start, switchable current selector
red
built-in lead with standard connector
built-in jack for charging 4, 5, or 8 cell radio packs
solid-state reverse polarity and current overload
4.1 x 3.5 x 1.1" (104 x 90 x 29mm)
9.17 oz (260 g)
™ , RS4 Battery (DTXC2210)
® Tx Charge Jack (DTXP4152)
® Tx Charge Jack (DTXP4153)
male (GPMM3131)