Honda Goldwing GL1200 Installation Manual page 12

Loosen the lock screw in the actuator cable hole. Insert the cable
all the way into the hole with the lock screw until the cable
contacts the shoulder in the hole. Gently tighten the lock screw
to retain the cable. Push the cable in and out to check that it
moves freely.
Route the actuator cable so that it sits between the coolant tank
filler neck and the radiator connecting hose, the between the two
Place the ball nipple on the actuator cable in the hole in the thin
actuator spool and place the spool in the CIU with the semi
circular groove facing up. Rotate the spool clockwise to fully
extend the cable.
Honda Goldwing GL1200 ©
electrical black boxes
mounted in front of
the coolant tank.
Screw the adjuster on the end of the carburettor cable all the way
into the un-slotted hole in the CIU. The cable should form a smooth
curve up around the OUTSIDE of the frame tubes to the CIU.
12