Memory Configuration Table - SOYO SY-7VCA-E Quick Start Manual

SY-7VCA-E Quick Start Guide
¡ ° N ote: The STR LED is connected to the Voltage that feeds the DIMM sockets. Therefore
the following table applies:
Suspend to RAM Normal Operation Power Off
STR LED BLINKING ON OFF
Configure Memory
Step 3.
Your board comes with three DIMM sockets, providing support for up to 1.5GB of main
memory using unbuffered and registered DIMM modules from 8MB to 512MB. On this
motherboard, DRAM speed can be set independent from the CPU front side bus speed.
Depending on the DRAM clock speed setting in the BIOS setup, appropriate memory
modules must be used. For 66MHz DRAM speed, use PC66 memory; for 100MHz DRAM
speed, use PC100 memory; for 133MHz DRAM speed, use PC133 memory.

Memory Configuration Table

Number of
DIMM 1 DIMM 2 DIMM 3
Memory Modules
RAM Type SDRAM / VCM SDRAM
Memory Module
8/16/32/64/128/256/512 MB
Size (MB)
Note:Always install memory modules in the order prescribed in this table.
9